audi diesel tools vw diesel tools vw tdi tool tdi special tools -- mmk4mkt

2 Pins and 2 Plates 103.00

2 Pins and 2 Plates Set of four tools.VW Audi T.D.I. and New Beetle Cam Kit Reference numbers for the two tools on the left are: 3418 and 3359. Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998 and newer VW models equipped with a T.D.I. engine. This two piece lock plate and alignment pin allows the technician for factory correct and trouble free installations.

Tools on the right side of image are Diesel Lock Plate / Cam Setting Bar Same as Volkswagen ref 2065a Tool used for securing the cam shaft from rotating and maintaining correct timing position engine AAZ during R&R of cam shaft drive belt. Applicable: VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 Lock Pin for Diesel (Same as VW tool 2064). Tool used for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Volkswagen Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 All 4 tools are High Quality Made in Europe!

Set of 4 with Indicator 63.50
"Baby Grand"
Set of 4 Tools
Including Dial Indicator
Plus VA6015 Diesel ToolUsed for accurate adjustment of Bosch diesel injection pump.This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator.(not included).Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines.
PLUS 2065A Diesel Cam Shaft Locking Plate
PLUS 2064 Pin.
read more:

Pin , Plate and Holder 51.99
Set of three tools including:VA6015 Diesel ToolUsed for accurate adjustment of Bosch diesel injection pump.This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator.(not included).Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS 2065A Diesel Cam Shaft Locking Plate 2065aPLUS 2064 Locking Pin
read more:

Locking Pin and Plate 26.50

Set of two tools including:2065A Diesel Cam Shaft Locking PlateThis locking Plate (above) is the same as vw tool 2065a Used for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS:2064 Lock Pin for Diesel This Locking Pin is used forsecuring Bosch diesel injection pump sprocket from rotatingduring R&R of cam shaft drive belt.This Pin also assists in locating the general timing position of pump.Applicable: All VW/Audi diesel engines.

Timing Kit Master Set 1 254.00

Serious Master Set: Description (for upper 3 tools) Timing belt on engine ALH. Chassis 1999 1/2 thru 2003 Golf Jetta (A4) MKIV and New Beetle TDI thru 2003.Reference numbers for the three tools are 3418 (Left side of image above) 3359 (Pin Center) and T10020 (Wrench Right. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine.

BELOW IS THE DESCRIPTION ON THE LOWER 5 TOOLS. Five tools: vw 3032, 2066, 2065A, 2064 and 12717 (Pin Wrench) Details: 3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: VW / Audi diesels : 2066 Used for accurate adjustment of Bosch diesel injection pump. 2065A Diesel Camshaft Locking Plate Tool 2064 Lock Pin for Diesel. Pin Wrench 121717 Made in Germany for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of idler pulley and rotates around the off center retaining bolt allowing for belt tension adjustment (Tension Pulleys) 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80. You will get all 8 tools shown here.

Set of 5 with Indicator 123.99
"Grand Master"
Set of 5 Tools
Including Dial Indicator
Plus 3032 Injection Pump Tool
Puller used for the proper extraction of injection pump drive gear.
Applicable: Volvo and VW / Audi diesels Excluding TDI *
PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump.
PLUS: 2065A Diesel Camshaft Locking Plate
PLUS: 2064 Pin.
read more:

Pin , Plate and Holder 64.00

Set of three tools including:VA6015 Diesel ToolUsed for accurate adjustment of Bosch diesel injection pump.This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator.(not included).Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS 2065A Diesel Cam Shaft Locking Plate 2065aPLUS 2064 Locking Pin

Big Mak 126.00
Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator
read more:

Pump Tool plus Pin , Plate and Holder 127.99

Set of 4 tools including:3032 Injection Pump ToolPuller used for the proper extraction of injection pump drive gear.Applicable: Volvo and VW / Audi diesels Excluding TDI * PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump.PLUS: 2065A Diesel Camshaft Locking Plate Tool PLUS: 2064 Lock Pin for Diesel

Audi VW Headbolt Tool Set 2 29.50

These are the tools you are looking for!VW AUDI Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Set 3 Audi Clutch Tools 13.99

Set of 3
Audi Clutch Alignment Tools
Covers a BIG variety of Audi (and many Volkswagen Applications).
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Locking Pin Only 9.50
Lock Pin for Diesel 2064 For securing Bosch injection pump sprocket from rotatingduring R&R of cam shaft drive belt. This Pin also assists in locating the general timing position of pump.Applicable: All VW Audi diesel engines. Volvo D24
read more:

BigMak Timing Kit 196.00

Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator

Puller, Pin , Plate , Holder , Pin Wrench 146.00

Set of five tools: vw 3032, VA6015 PLUS 2065A PLUS 2064 PLUS 12717
Details:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI * PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump. PLUS: 2065A Diesel Camshaft Locking Plate Tool PLUS: 2064 Lock Pin for Diesel. Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Cam Locking Plate Only 16.99
Cam Shaft Locking Plate 2065AUsed for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.All VW Audi Diesel and Volvo D24 6 Cylinder 2.4L diesel 1981 86 engines.
read more:

Headbolt & Drain Plug Socket Set 2 28.00

Drain Plug Socket
Plus Heabolt Tool
Details: Tamperproof Transmission Drain Plug Socket.
Triple Square (12 Point XZN)
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

Plus Audi Headbolt Tool
Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Set of 2 Audi Tools from ZDMAK

Dont hesitate...these are BOTH the CORRECT tools for the job!

Dial Indicator and Holder 98.50

Bosch Diesel Injection Pump
Timing Indicator Tools.
With High Quality Dial Indicator Made in Germany!
You will not find this price anywhere except Zdmak!
Tools are used for the accurate setting of
the Bosch diesel fuel injection pump timing.
The Holder screws into the back of the injection pump,
giving a dial indicator reading necessary for setting
the correct pump timing.
This set comes complete with the correct tools for the job!
Contents: Metric Dial Indicator Made in Germany,
plus holder plus the 10cm dial indicator extension pin,
making the timing easy to set,
as the timing has a range from 0.83mm to 1.15mm.
For use on VW and Audi diesels.
Also works with 1981 1986 Volvo 6 cyl 2.4L diesels,
1989 1994 Dodge 6 cyl 5.9L diesels.

FYI FOR PEOPLE WHO DECIDE "NOT" TO USE THIS SET
Here is some helpful info...Universal conversion factor for milimeters into decimal inches is .03937
EXAMPLE: 13mm X .03937= .5118"

Complete VW Audi Radio Keys 24.99

Set of Volkswagen Audi Radio Removal Tools Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box.
PLUS * Set Number vw 3316 Radio Removal Tools New Body Style Passat Jetta Golf Please check your manuals for details.
You will get virtually full VOLKSWAGEN coverage with this set
Plus BMW Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.YOU ALSO GET THE SPECIAL SMALL ALLEN (Right) side of picture FOR NEWER E38 & E39 7 SERIES
Plus * MERCEDES RADIO REMOVAL KEYS FOR NEWER AND OLDER VEHICLES

Headbolt Tool Set 2 29.50

These are the tools you are looking for!
Plus they are on sale!
Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Pin Wrench Set 2 49.00

This is the Best Quality Set of the two CRUCIAL VW Audi Pin Wrenches you will find anywhere.
SUPER HIGH QUALITY TOOLS (BOTH) MADE IN GERMANY BY HAZET.
First item is number V159 (this is a smaller tool on the left side picture is not to scale) This tool is for easy adjustment of Camshaft spur belts
(toothed belt) on idler pulleys with Pin holes. This wrench with its protruding pins, grabs the center
of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment.
Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80
Distance of pins 18 mm, diameter of pins 2.9 mm for deep located idler pulley
on toothed belt on 1,6 l diesel engine VW van T3 (up to model 1991).
V159 is the correct number the old VW Number on this (smaller) tool was 2587.

T10020 Special wrench with an offset (angled) head (Larger tool on right side of image)
This tool also used for adjusting timing belt tension.
99 and later VW Golf, VW Jetta and Beetle with 2.0 Litre Gas and 1.9 Litre TDI Engines.1999 and newer Golf, Jetta
New Beetle with 2.0l gas engine and 1.9l T.D.I. Diesel engine. You will get both tools with this purchase.

Headbolt & Drain Plug Socket Set 28.00

TWO TOOLS!!!
Audi Headbolt Tool (LEFT)Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Plus Drain Plug Socket (right)Special Tamperproof Transmission Drain Plug Socket.Triple Square (12 Point XZN)Same as Volkswagen Tool 3357.For Porsche Boxster and Audi A4, A6 and Passat. Dont hesitate...these are BOTH the CORRECT tools for the job!

Radio Removal Set 24.99

Holder ONLY 37.50
Dial Gauge Holder VA6015Diesel Tool Used for accurate adjustment of Bosch diesel injection pump. (SAME AS VW TOOL 2066)
I only sell one holder (size) and this is it...same as 2066)
This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator (not included).All VW Audi diesel and Volvo D24 6 cylinder 2.4L diesel 1981 86 engines. This holder will only work with a dial guage with a shank size of 8mm or less.
It will NOT work with a lager shank.
read more:

VW Audi Set Valve Tools 49.99

Two (2) Valve Adjusting Tools
Valve Shim Tool (10 208) Used for proper R&R of valve adjusting shims.
Applicable: Overhead Cam engines with adjusting shims
Plus
VW546 Tappet Depressor Tappet Depressor used for preloading cam followers.
For Bucket Tappets on VW Golf, Jetta, Caddy, Scirocco,
Passat up to 1982 Also Audi 80 , 100

T.D.I. Timing Kit 3 Tools 115.50

T.D.I. and New Beetle Cam Kit for correct and trouble free installations. Three crucial tools for changing timing belt on engine ALH. Chassis 1999 1/2 thru 2003 Golf Jetta (A4) MKIV and New Beetle TDI thru 2003.Reference numbers for the three tools are 3418 (Left side of image above) 3359 (Pin Center) and T10020 (Wrench Right)
This is a popular set for Diesel timing of Bosch injection pumps.This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine. Lock plate and alignment pin allows the technician for factory correctand trouble free installations.

Locking Pin 9.50

Lock Pin for Diesel 2064 For securing Bosch injection pump sprocket from rotatingduring R&R of cam shaft drive belt. This Pin also assists in locating the general timing position of pump.Applicable: All VW Audi diesel engines. Volvo D24

TDI Cam Kit 2 Tools 88.50
T.D.I.
New Beetle Cam Kit
Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps.This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine.This two piece lock plate and alignment pin allows the technician for factory correctand trouble free installations.
Reference: VW numbers 3418 and 3359.
read more:

SpecialOpen Socket 22mm 25.00

On Sale *
22mm Special TubeSocket
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)
2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606).
Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro.
This tool is often used in conjunction with a 7mm hex wrench.
Clickhere for a picture of the tools in action:

22mm Strut O/2 Sensor Socket 18.99

On Sale 22mm Special Tube Socket 1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) 2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606). Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro. This tool is often used in conjunction with a 7mm hex wrench.Clickhere for a picture of the tools in action:

Special Open Socket 22mm 25.00

TDI Cam Tools 148.50
Volkswagen ref: T40001
First number 2510 1
Extractor (Puller)for the camshaft phasing gear with 5 and 6 spokes on 4 resp.
6 cylinder engines TDi, engines V6 and V8,
AUDI A 4, A 6, A 8
Second Item 2510 8 Extraction Hook
for the careful extraction of camshaft phasing gear with 5 spokes on VW/AUDI V8 carburetor engines.
Call if you have questions about this item.
read more:

Cam Shaft Locking Plate 16.99

Cam Shaft Locking Plate 2065AUsed for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.All VW Audi Diesel and Volvo D24 6 Cylinder 2.4L diesel 1981 86 engines.

Power Steering Waterpump Pulley Tool 24.00

VA6024Power Steering and Waterpump Pulley Removal & Replacement Tool Volkswagen AudiUsed to hold the power steering or water pump pulley stationarywhile removing or replacing the three socket headbolts that attach pulley to the shaft.Tool is designed to be used on pulleys that utilize these socket head bolts.Applications:VW Audi 4 cylinder water cooled gas or diesel engines from 1975 to current.Volkswagen V6 1992 and newer.Audi power steering pump pulley V8 1990 and newer.Audi V6 1992 to current.Also VW 1983 to 1988 and Audi 1981 to 1995 with socket head boltsholding the pulley to power steering pump.

World Class Hazet Tools 0.00

Number 2593 28 Shock absorber cartridge socket 295mm long. For Audi 80 from 1992 on and Audi 90 from 1987.
1/2 inch drive.
High Quality Tool Made in Germany.

Dial Gauge Holder 37.50

Dial Gauge Holder VA6015Diesel Tool Used for accurate adjustment of Bosch diesel injection pump. (SAME AS VW TOOL 2066)
This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator (not included).All VW Audi diesel and Volvo D24 6 cylinder 2.4L diesel 1981 86 engines. This holder will only work with a dial guage with a shank size of 8mm or less.
It will NOT work with a larger shank.

10mm Glow Plug Tool 69.99

10mm Universal Glow Plug Socket mainly for VW Audi Diesel Injection TDI 3/8 Drive.
High quality tool
Made in Germany by Hazet!
DETAILS: ALFA ROMEO, AUDI, CHRYSLER, FIAT, FORD, MERCEDES, LAND ROVER, RENAULT, SEAT, VOLKSWAGEN.

17 x 17mm Open End 59.50

Double Ended Flare Nut Box Wrench for Fuel Supply Fuel Injection 17 x 17mm Open End Crowfoot style chrome plated, for injection pipes on Volvo (Bosch Lines) Diesel D24 VW AUDI diesel engines, 1.6 l, 4 cyl., 2.0 l, 5 cyl., 2.4 l, 6 cyl. Super high quality tool made in Germany by Hazet.

Radio Keys for VW Audi 14.99

Set Radio Removal Tools
Complete Set of 4Volkswagen Audi Radio Removal ToolsAudi A4, A6, A8 and New BeetleFor Concert, Symphony I and Symphony II stereos.Also for Nav units in Trunk and for CD changers in Glove box.

Re: Resetting Factory Stereo and Handsfree* Mounting Bracket: InstalliionYour Handsfree* kit may require you to remove the radio.(Only two of these are required for Concert, Concert II, Gamma, Delta and others)Tools are for "Top Left" or Top Right" etc.
Buying Radio Keys can be confusing. Here is the deal. If you are working on the vehicles mentioned above or a newer vehicle which requires 4 keys, the odss are this set will do the job.

More radio info: If you are looking for the (2 key set for units with only two slots type the number 3316 in the seach button).

Bonus Triple Square Set 5 49.99

12 Point Headbolt Tools Plus Drain Plug Socket. (Anyone looking knows how hard it is to find a good price on XZN Tools here you have the extremely popular size 10 and more...)
The Headbolt Set of 4 Includes: 6mm, 8mm, 10mm & 12mm
with 3/8 Drive holders on a rail.
Plus you get
Drain Plug Socket (Upper Left)
Special Large size M16
(Notice the Tamperproof Center on the M16)
Drain Plug Socket Triple Square (12 Point = XZN )
For Porsche Boxster and Audi A4, A6 and Passat
A very handy set for the VW, Audi, Porsche and German car mechanic.

Note: The 4 pieces (Right) are regular XZN and the drainplug tool is tamperproof.
You will get all five pieces with this purchase.

FENDER PROTECTOR 0.00

FENDER PROTECTOR FOR AUDI
PREVENTS DAMAGE TO FRONT QUARTER PANELS ON AUDI VEHICLES DURING REPAIR. COVER WILL NOT SCRATCH VEHICLE. SUITABLE FOR ALL AUDI MODELS * EXCEPT AUDI TT

Audi VW Headbolt Tool 32.99

Polydrive Cylinder Head Socket for VW/Audi.
This fits in the new special profile. Ref: Volkswagen number T10070.
This is not a torx and it is not a cheesehead or triple square. This is called Polydrive.
The overall length is 168mm. Shaft length is 130.
Super High Quality Tools Made in Germany by Hazet!

10mm Glow Plug Socket 69.99
10mm Universal Glow Plug Socket mainly for VW Audi Diesel Injection TDI 3/8 Drive.
High quality tool
Made in Germany by Hazet!
read more:

Extractor Tool Kabelex 00

Ejection extractor tools for contacts MAN/Volvo, DaimlerChrysler, BMW, Porsche, Volkswagen, Audi: tools for flat plug in sockets with asymmetrically positioned latches in terminals with single release, with two release channels,etc..
ClickHere for More Kabelex information. Extractor tools for soldered contacts, for Micro Timer I, cable extractor tools for Micro Timer II, III, Pit Pod contacts, Maxi Power Timer , SLK contactsetc...

Tappett Depressor 44.99

Tappet Depressor needed for preloading cam followerswhile exchanging valve adjusting shims.Applicable: Late model VW Audi 4 and 5 cylinder gas engines.More Detail: Some German Tool books have the following info on this tool...For all 4 cylinder engines with bucket tappets 1983 and Newerand all 5 and 6 Cylinder with bucket tappetsGolf, Jetta, Scirocco, Passat, Audi 80, Audi 80 Coupe,Audi 80 Quatro, Audi 100, 200,LT28 50D

Tappet Depressor 44.99

Tappet Depressor 2078A used for preloading cam followerswhile exchanging valve adjusting shims.Applicable: Late model VW Audi 4 and 5 cylinder gas engines.More Detail: Some German Tool books have the following info on this tool...For all 4 cylinder engines with bucket tappets FROM YEAR 1983 and Newerand all 5 and 6 Cylinder with bucket tappetsGolf, Jetta, Scirocco, Passat, Audi 80, Audi 80 Coupe,Audi 80 Quatro, Audi 100, 200, LT28 50D

Pin Wrench Socket 14.99

VW524Pin Wrench Socket with 1/2" drive.This tool is used for R&R of grooved ring retaining nuton strut tower of front shock absorber. Applicable: This popular tool is used on a wide variety of VW and Audi MK1 golf and GTi , MK2 Golf & GTi 8V and 16VPolos..Audi Coupe..Audi 80 & Audi 90
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

TDI Cam Tools 289.50

Volkswagen ref: T40001
First number 2510 1
Extractor (Puller)for the camshaft phasing gear with 5 and 6 spokes on 4 resp.
6 cylinder engines TDi, engines V6 and V8,
AUDI A 4, A 6, A 8
Second Item 2510 8 Extraction Hook
for the careful extraction of camshaft phasing gear with 5 spokes on VW/AUDI V8 carburetor engines.
Call if you have questions about this item.

Cam Kit 2 Tools 88.50

New Beetle and T.D.I. Cam Kit Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps.This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine.This two piece lock plate and alignment pin allows the technician for factory correctand trouble free installations Reference: 3418 and 3359.

Valve Spring Tool & Bridge 142.50

Valve Tools (2)
Set including:Valve Spring Compressor Bar
Same as Volkswagen Tool Number VW 541/1
Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl.

You Searched for

audi diesel tools

Trade Links With ZDMAK