fan clutch tools FIND fan clutch tools bmw fan clutch tools -- mmk4mkt

Set 3 Porsche Clutch Tools 13.99

Set of 3
Porsche Clutch Alignment Tools
Covers a BIG variety of Porsche Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Set 3 BMW Clutch Tools 13.99

Set of 3
BMW Clutch Alignment Tools
Covers a BIG variety of BMW Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Set 3 Audi Clutch Tools 13.99

Set of 3
Audi Clutch Alignment Tools
Covers a BIG variety of Audi (and many Volkswagen Applications).
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

BMW Clutch Tool 6.99

BMW Clutch Alignment Tool
The ZDMAK clutch tools are extremely durable
long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.Read more about this toolClickHere

BMW Cluth Pilot 6.99

Clutch Centering Mandrel Set 62.50

Original Factory Tools BMW Clutch Centering Mandrel Set 212140 Made in Germany For centering clutch disc on flywheel while installing self adjusting clutch (S.A.C.) Phase in of SAC IN e46 09/97 e38, e39, e46, r50, r53, s5g 200g, s5d 250g s5d 260z s5d 310z s6s 420g s6s 560g Set consists of two different BMW numbers to make this set you get one of each of the following: 212141 / 212142 (the numbers are also marked on the tools)

Volvo Clutch Tool 6.99

Volvo Clutch Alignment Tool (Diesel D24)Clutch tool is extremely durable long lasting and inexpensive. These tools can be used over and over again.A must for clutch repair shop, clutch specialist, transmission repair shops, automotive stores, school shop classes, clutch resellers, foreign and domestic repair shops.

BMW 3008 Pack 89.50

SET OF 3 Includes:
Holding Tool for securing water pump hubfrom rotating during R&R of fan clutch nut.APPLICABLE M10, M20, M30, M50, WITH 32MM CLUTCH NUT.
Plus *
2 Long Pattern Thin Wrenches
German Car Special Tools *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for the two thin wrenches

Mercedes and BMW Set 89.50

ON SALE 7 Pc Benz and BMW Tools Including 4 Mercedes Tools a BMW Holding Tool plus 2 Thin Wrenches.
Benz Tools are:
1.Hub Securing Bar 113 0040 Used for securing Waterpump hub from rotating during R&R of Fan clutch nut. This holder bolts onto the hub, as the poly v belt is not in place and cannot be used to lock the hub. Applicable:M112 & M113

2.Locking Hook needed for securing the visco fan couplingduring R&R of 8mm hex fastener w/o removing the radiator: Mercedes M103.

3.Wrench / Holding Bar. This is similar to Benz Number 900 589 0307 00 Comes complete with 8 and 10mm Allen bits.The 8mm is needed for R&R of fan clutch fastenerApplicable M103, 104, 111, 119, 120 OM 602, 603, 605, 606The 10mm is used for adjusting A/C belt tension and R&R of idler pulleyModels 420, 560 with V 819 86 and Newer
4. Thin Wrench 65mm with an 8mm overall thickness and an overall length of 16 inches for proper leverage. Mercedes ref: 120 589 0201 00

BMW Double Waterpump ToolThis special tool covers most popular applications used for securing Water Pump Hub from rotating during R & R of Fan Clutch NutApplicable:M10, M20, M30, M40, M41, M42, M50, M60, M62

Trans Clutch Spring Compressor 59.50

Transmission Clutch Spring Compressor. For removing and installing the trans rear clutch piston snap ring adjustable for many domestic cars and light trucks. Applies pressure to the retaining washer in the clutch drum to compress clutch piston return springs in order to remove or install snap ring during repairs or overhaul.

BMW Holding Tools 59.99

Set of 2 Repair ToolsIncluding: Thin Wrench Number 1032X36TThis Wrench is 32 X 36mm with an 8mm thicknessand an overall length of 12 inches for proper leverage.Many applications for this handy thin wrench.PLUS: Counter Holder 3008Used for securing the waterpump hub from rotatingduring R & R of fan clutch nut.Applicable: M10, M20, M30, M50 with 32mm clutch nutSET NUMBER BMW3632 3008

Saab Clutch Spacer 15.50

Saab Clutch Spacer for 1976 and newer 900 and 99 Models tool used for clutch ring support during removal or replacement.

Clutch Wear Gauge 23.50

Clutch Wear Gauge used for checking thickness of clutch diskwithout removing the transmission. Applicable: BMW models '75 and newer

Clutch Cable Tool 26.00

NUMBER 3151Clutch Cable Fixture Volkswagen Factory Tool Made in GermanyUsed to position the self adjusting clutch cable at transmission during assembly(Self Adjusting Clutch) GOLF JETTA SCIROCCO 1985 and Newer

BMW 3037 Pack 91.00

SET OF 3 Includes:
Holding Tool for securing water pump hubfrom rotating during R&R of fan clutch nut.Applicable: Engine M40, M41, M42, M60, M62
Plus *
2 Long Pattern Thin Wrenches
German Car Special Tools *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for the two thin wrenches

Clutch Tool 39.99

3190a Centering Mandrel for drive plate when assembling the Clutch.

Saab Clutch Spacer 24.99

Saab Clutch Spacer for AP / BORG BECK ONLY(Picture is for reference not actual tool)

4 Tools for BMW 34.99

Lot of 4 Tools for BMW Repair You get all four tools pictured with thispurchase. The First item (clockwise top left to right) 
A. "Double Waterpump Tool" This special tool covers most popularapplications Used for securing Water Pump Hub from rotating during R & R ofFan Clutch Nut BMW engines:M10, S14, M20, M21, M30, S38, M40, M41, M42, M43,M44, M50, M52, M60, M62, S50
B. "Radio Removal Tool" Pentagon shaped tool with 5 Sides. Theoverall length of this tool is 3 5/8 inches. Appl: Most BMWs. Including E38 E397 Series etc This tool is used to release anti theft radio mounts.
C. "Flexible Shaft" Hex Nut Driver Size on this Nut Driver is 6mm Rubber coated flexible shaft Nut Drivers work well on hose clamps, hex headedscrews and nut screws.
D. "Extra Long 5/8 Spark Plug Socket" (16mm) Overall Length is 4 1/2 inches. 3/8 Drive . Knurled drive end plus rubber insert for better grip.

Counter Holder 3008 37.50

Counter HolderWATERPUMP HUB TOOL BMW3008 Holder used for securing the waterpump hub from rotatingduring R & R of fan clutch nut.APPLICABLE M10, M20, M30, M50, WITH 32MM CLUTCH NUT.

Set 2 Power Lifter Pickup Tools 38.00
Set of 2 * Pick up Tools
One 19 inch long with lift cap 1.5lbs.
One 2 feet long with 3 lbs. capacity.

Please note: picture is for reference only.

Tools are also sold separately below.

read more:

Clutch Pilot Tool Ferrari 7.99

Clutch Pilot / Alignment Tool for Ferrari 1967 to 1998.
In stock...call or email for more info.

108 Piece Bit Set 34.99

108 Piece Bit and Socket set of tools. You get all tools shown inluding the super 8 piece XZN Socket set on the right side of the image. Description as follows: Triple Square Set 8 PieceXZN STUBBY (short pattern) 3/8 Drive Sizes included:4mm, 5, 6, 8, 10, 12, 14 and 16mm Sturdy compact One Piece design. Satin Chrome with black impact tips. S2 Alloy Steel. Fully Heat Treated

100 pc security bit set: Made of industrial quality S2 Steel Magnetic bit holder . Socket Bit Holder 1/4 sq. x 1/4 Hex Extensions: 1" & 2" Phillips 0, 1, 2, 3 . Posidrive 0, 1, 2, 3 Slotted 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8 . Spanner 4, 6, 8, 10 Torx T8, T10, T15, T20, T25, T27, T30, T40, T45 Tamperproof Torx T8, T10, T15, T20, T25, T27, T30, T35, T40 Hex (SAE) 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 Hex Tamperproof (SAE) 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 Hex (Metric) 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8MM Hex Tamperproof (Metric) 2, 2.5, 3, 4, 5, 5.5, 6MM TriWing 1, 2, 3, 4 . Torqset 6, 8, 10 . Clutch 5/32, 3/16, 1/4 Square Recess 0, 1, 2, 3 . Spline 5, 6, 8MM . Wing nut Y Bit

BMW Holding Tools 63.00

Set of 2 Repair ToolsIncluding: Thin Wrench Number 1032X36TThis Wrench is 32 X 36mm with an 8mm thicknessand an overall length of 12 inches for proper leverage.Many applications for this handy thin wrench.PLUS: Counter HolderUsed for securing the waterpump hub from rotatingduring R & R of fan clutch nut.Applicable: Engine M40, M41, M42, M60, M62SET NUMBER BMW3632 3037

Holding Tool and Wrench Set 49.99

Set of 3 Includes:
Double Waterpump Tool*
This special tool covers most popular applications
Used for securing Water Pump Hub from rotating during R & R of Fan Clutch Nut
Applicable:M10, M20, M30, M40, M41, M42, M50, M60, M62

Plus
2 Long Pattern Thin Wrenches
German Car Special Tools
One of each size: 36mm and 32mm
Overall length of 15 inches.
Thickness of each wrench is 8mm.

Reversible Air Driver 00
Item1935I/4DescriptionReversible air screwdriverSpecificationsThe high number of rpms is synonymous with high screwing capacities.Provided with an external adjustable clutch with air shut off.Suitable for assembly jobs on light materials like plastic and sheet metal.The chuck is rotated by the pressure the user makes. Once the torque needed is reached, the clutch shuts off the air exiting from the tool, thus locking the tool. The torque can be adjusted by means of the spring (see photo), or by replacing the spring with the ones supplied with the tool: white, 2.3 mm (light); yellow, 2.6 mm, mounted on the tool (medium); orange, 3.0 mm (strong). Quick release chuck and balancing hook.Motor provided with muffler and rear exhaust.
read more:

Insulated Driver Set Made in Germany 48.50
Professional Quality Insulated Tool Set.Individually Tested Tools Certified To 1000 Volts.Tools Meet The Following Safety Specifications:ASTM F 1505 01 IEC 900 VDE 0682/Part 201 ISO 9001Certified Tools Meet OSHA Definition For Insulated Tool Requirements.Quality Tools Made In GermanyCVM Tool Steel Hardened To Average 58/60RC. 10 Piece Insulated Screwdrivers
Set Includes:Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 6.5 Phillips: 0, 1, 2, 3
read more:

Two Pickup Tools 9.99
RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.
read more:

Two Thin Wrenches 24.99

"Long" Pattern Thin Wrenches
Set of Two (2)
One of each size: 36MM and 32mm
Brand New "Long Thin Wrenches"
Many applications for these two tools,
especially for European cars.
Overall length of 15 inches.
Thickness of each wrench is 1/4"(6.35mm)
Some applications include:Mercedes and BMW R&R of fan clutch hub nut.
Porsche 32mmused for R&R of tie rods Model 911 Turbo, 89 76
36mm Needed for proper adjustment of rear ride height 911 , 89 77 etc...

Set Two Long Thin Wrenches 24.99

German Car Special 2 Thin Wrenches 24.99

"Long" Pattern Thin Wrenches
Set of Two (2)
One of each size: 36MM and 32mm
Brand New "Long Thin Wrenches"
Many applications for these two tools,
especially for European cars.
Overall length of 15 inches.
Thickness of each wrench is 1/4" (6.35mm)
Some applications include:Mercedes and BMW R&R of fan clutch hub nut.
Porsche 32mm used for R&R of tie rods Model 911 Turbo, 89 76
36mm Needed for proper adjustment of rear ride height 911 , 89 77 etc...

Holding Tool & 32mm Wrench 39.99

Set of two tools for BMW Repair Includes:
Double Waterpump Tool. This special tool covers most popular applications
Used for securing Water Pump Hub from rotating during R & R of Fan Clutch NutApplicable:M10, S14, M20, M21, M30, S38, M40, M41M42, M43, M44, M50, M52, M60, M62, S50

Plus Long Pattern "Thin Wrench" 32mm Open End.
What makes this set different from other sets you will see is the 32mm wrench. This is a heavy duty tool and 20 inches long.
No one else has a set like this for the price. The 32mm is a WHOPPER.

Long Thin Wrench Set 2 24.99

"Long" Pattern Thin Wrenches
Set of Two (2)
One of each size: 36MM and 32mm
Brand New "Long Thin Wrenches"
Many applications for these two tools,
especially for European cars.
Overall length of 15 inches.
Thickness of each wrench is 1/4" (6.35mm)
Some applications include:Mercedes and BMW R&R of fan clutch hub nut.
Porsche 32mm used for R&R of tie rods Model 911 Turbo, 89 76
36mm Needed for proper adjustment of rear ride height 911 , 89 77 etc...

Klein Tool Pouch 46.95
Klein Tool Pouch
Leather, 8 Pockets, Thong, Snap, Tunnel Loop
Leather construction. Provides space for an large number of tools. Riveted to assure long life.
Klein Tools product line includes virtually every major type of hand tool used in construction, electronics, mining, and general industry in addition to the electrical and telecommunications fields.Klein Tools also supplies a line of occupational protective equipment. Klein remains dedicated to supplying only the finest quality products.Made for professional users, Klein tools are available through stocking distributors worldwide.
read more:

Set 4 Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

BMW Daily Double 27.50

Daily Double!
Two Tools
Including Item Number BMW3022: Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.
Plus the two sided counter holder. More details about this tool number BMW 1703 Waterpump Tool
This special tool covers most popular applicationsUsed for securing Water Pump Hub from rotating during R & R of Fan Clutch NutApplicable:M10, M20, M30, M40, M41, M42, M50, M52, M60, M62 (1703 should be used in conjunction with a 32mm or a 36mm thin wrench). Picture is not to scale.

Set of Two Terminal Tools 29.50

Special Electrical Tools Terminal Tools Set of 2
Special Electrical Tool Terminal Tool Eliminate Damaged wires and Terminals. Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals.

Super Strong 30 X 32mm 27.50

Big Sucker! Metric Thin Wrench 32 x 36mm with just over a 1/4 inch (8mm) thickness and overall length of 13 1/2 inches for proper leverage. This is a STRONG BEEFY tool you will like. A very good tool for the experienced technician and should be one of the first items a new tech will purchase. All European auto techs need thin wrenches and this is one the best values on the market and it is a heavy duty tool that will pay for itself very quickly. For use on Oil Lines, Fan Clutch work, A/C and Transmission work. These thin wrenches are becoming more and more necessary every day. Some applications include: Mercedes and BMW R&R of fan clutch hub nut. The 32mm is used for R&R of tie rods Porsche model 911 Turbo, 1976 89and the 36mm is needed for proper adjustment of rear ride height Porsche 911 1977 89 etc...This item is on sale now.

Counter Holder 18.50
Counter Holder 2615
Used for securing water pump hubfrom rotating during R&R of fan clutch nut. Applicable: G.M. Light to Heavy duty engines 96 and newer.
read more:

Two Pickup Tools 5.50

RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.

More Tools 0.00

Be sure to look in the VOLKSWAGEN section for more tools. Plus you will find some sweet deals in the ZDMAK SPECIALS section, and in the TODAYS SPECIALS section. If you need something quickly please email or call. Expedited or Air shipments should be called in as early in the day as possible. I will do all I can to get you the tools you need or help you with your tool search.

Set 7 Marking and Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Set of 6 Exhaust Tools 00
Item5965VA8DescriptionAssortment of 6 exhaust system tools
read more:

GM Counter Holder 18.50

GM Counter Holder Tool used for securing water pump hubfrom rotating during R&R of fan clutch nut. Applicable: G.M. Light to Heavy duty engines 96 and newer. Counter Holder 2615 Used for securing water pump hub from rotating during R&R of fan clutch nut. Applicable: G.M. 1996 and newer. Designed to work with both 10mm and 13mm pulley bolts. Details: 4.3 L Astro & Safari vans, Blazer and Jimmy sport vehicles2.2 L 4 Cyl & 4.3 L V6 S 10 & Sonoma small pickups; 4.3 L 6 , 5.0 L V B and 5.7 L V8, C1500, C2500, C3500, K1500, C1500 Sierra, C2500 Sierra, C3500 Sierra and K1500 Sierra pickups, G1500 or G2500 Chevy Express, G1500 or G2500 Savana vans, 5.7 L V8 Suburban, Tahoe and Yukon.

Shortie * Drain Plugs 3/8 Drive Tools 0.00

Serious Stubby Short Pattern 3/8 drive Hex Allen Drain Plug Sockets. Very Hard to find in this short version in a 3/8 drive. These tools will work well in a tight spot.
The larger 1/2 drive tools are too big for some applications.
Sizes available 17mm, 14mm, 13mm, 12mm, 10mm and 8mm.
Sold each or in a set of 6.

M8, M10 and M12 Triple Square Set 3 39.99

Super Set!
Three Headbolt Tools Triple Square 12 Point (XZN) Sockets M8, M10 and M12
Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.
Excellent for working on German vehicles.
Each tool is 5 1/2 inches overall and the shaft is 4 inches long!
Zdmak Special Set of 3 big 1/2 drive Tools!

Extractor Tool Kabelex 00

Ejection extractor tools for contacts MAN/Volvo, DaimlerChrysler, BMW, Porsche, Volkswagen, Audi: tools for flat plug in sockets with asymmetrically positioned latches in terminals with single release, with two release channels,etc..
ClickHere for More Kabelex information. Extractor tools for soldered contacts, for Micro Timer I, cable extractor tools for Micro Timer II, III, Pit Pod contacts, Maxi Power Timer , SLK contactsetc...

Ferrari Tools 00

If you would like a current sales flier on Beta Products and Tools please email with your complete mailing address and literature will be sent to you directly.
email: sales@zdmak.com

MoreBeta Ferrari Tools Here

Roll Up Pouch 6.99
Roll Up Pouch Only
DOES NOT INCLUDE TOOLS
PICTURE IS FOR REFERENCE ONLY
12 pocket pouch holds a variety of tools.
Great for auto and motorcycle use.
Made of heavy duty nylon fabric for long life.
Long web strap with velcro fastener keeps pouch closed tightly when not in use.
read more:

Cats Paw Capped Screwdrivers 43.50
6 Pc. Cats Paw Capped Screwdriver Set
Capped so you can strike with a hammer.
Phillips 1, 2, 3, Slotted 7/32", 1/4", 5/16"Blade extends throughout handle and is fully heat treatedTwo composite handle designed for user comfort and reduced hand fatigueCapped end Handle allows the user to strike the screwdriver without damaging the handleHex bolster for extra turning power.
Mayhew Tools has been manufacturing Punches and Chisels in the Western Massachusetts town of Shelburne Falls since 1856. As the oldest Punch and Chisel manufacturer in the U.S., Mayhew Tools has grown from a small tool house to the leader of the industry. Their product line has also grown to include an assortment of Wrecking and Prying Bars, Masonry Tools, Handguarded Tools, Screwdriver Type Pry Bars, Brass Punches, Pilot Punches, All Steel Wood Chisels, Nail Sets, Carbon Scrapers and Hollow Punches.
read more:

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

You Searched for

fan clutch tools

Trade Links With ZDMAK