headbolt tools FIND headbolt tools head bolt tool -- mmk4mkt

Audi VW Headbolt Tool Set 2 29.50

These are the tools you are looking for!VW AUDI Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Headbolt & Drain Plug Socket Set 28.00

TWO TOOLS!!!
Audi Headbolt Tool (LEFT)Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Plus Drain Plug Socket (right)Special Tamperproof Transmission Drain Plug Socket.Triple Square (12 Point XZN)Same as Volkswagen Tool 3357.For Porsche Boxster and Audi A4, A6 and Passat. Dont hesitate...these are BOTH the CORRECT tools for the job!

Headbolt & Drain Plug Socket Set 2 28.00

Drain Plug Socket
Plus Heabolt Tool
Details: Tamperproof Transmission Drain Plug Socket.
Triple Square (12 Point XZN)
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

Plus Audi Headbolt Tool
Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Set of 2 Audi Tools from ZDMAK

Dont hesitate...these are BOTH the CORRECT tools for the job!

Bonus Triple Square Set 5 49.99

12 Point Headbolt Tools Plus Drain Plug Socket. (Anyone looking knows how hard it is to find a good price on XZN Tools here you have the extremely popular size 10 and more...)
The Headbolt Set of 4 Includes: 6mm, 8mm, 10mm & 12mm
with 3/8 Drive holders on a rail.
Plus you get
Drain Plug Socket (Upper Left)
Special Large size M16
(Notice the Tamperproof Center on the M16)
Drain Plug Socket Triple Square (12 Point = XZN )
For Porsche Boxster and Audi A4, A6 and Passat
A very handy set for the VW, Audi, Porsche and German car mechanic.

Note: The 4 pieces (Right) are regular XZN and the drainplug tool is tamperproof.
You will get all five pieces with this purchase.

M8, M10 and M12 Triple Square Set 3 39.99

Super Set!
Three Headbolt Tools Triple Square 12 Point (XZN) Sockets M8, M10 and M12
Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.
Excellent for working on German vehicles.
Each tool is 5 1/2 inches overall and the shaft is 4 inches long!
Zdmak Special Set of 3 big 1/2 drive Tools!

M10 and M12 Triple Square Set 2 28.99

Set of 2 Tools
Headbolt ToolsTriple Square 12 Point (XZN) Sockets M10 and M12
Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.
Excellent for working on German vehicles.
Each tool is 5 1/2 inches overall and the shaft is 4 inches long!

Hazet Quality Tools 59.50
Bmw Headbolt Tool.
MADE IN GERMANY by Hazet!
E12 Female Special Lock Ball Torx Socket for cylinder head screws M42 4 cylinder/4 valve and M50 6 cylinder/4 valve. Drive size is 1/2 inch.
read more:

Bmw Headbolt Tool 59.50

Torx Pattern Bmw Headbolt Tool.
MADE IN GERMANY by Hazet!
E12 Female Special Lock Ball Torx Socket for cylinder head screws.
Some applications include: M42, M43, M44, M50, M52, M60, M62.

12mm Triple Square Headbolt Tool 24.99

Headbolt ToolTriple Square XZN Socket M12
12 Point Socket 1/2 Drive Super High Quality Tool!

10mm Triple Square Headbolt Tool 24.99

Headbolt ToolTriple Square XZN Socket M10
12 Point Socket 1/2 Drive Super High Quality Tool!

Headbolt Tool for BMW 34.50

Headbolt Tool for BMW Socket is designed to fit in the cylinder head on M42 and M50 engines to remove and install cylinder headbolts. Spring loaded detent ball holds bolt in place. Socket size is E12 for external TORX bolts. Heavy Duty tool 1/2 inch drive.

Super Duty Headbolt Tool 37.50

Headbolt Tool ....Read:
Same as Number T10070
Super Strong Headbolt Tool 1/2 Drive
(notice the solid one piece design)
Tool used to remove and install cylinder headbolts. New "Stronger" One Piece design. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2" Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socket The old tool number was 3452 and is now discontinued.. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. The German Tool Books call this a Polydrive. This is NOT a Torx socket although it is a 6 point tool. The points are more flat (squared off) than a torx. and it is NOT a XZN (tri square) Socket.

Audi VW Headbolt Tool 32.99

Polydrive Cylinder Head Socket for VW/Audi.
This fits in the new special profile. Ref: Volkswagen number T10070.
This is not a torx and it is not a cheesehead or triple square. This is called Polydrive.
The overall length is 168mm. Shaft length is 130.
Super High Quality Tools Made in Germany by Hazet!

Set 2 Power Lifter Pickup Tools 38.00
Set of 2 * Pick up Tools
One 19 inch long with lift cap 1.5lbs.
One 2 feet long with 3 lbs. capacity.

Please note: picture is for reference only.

Tools are also sold separately below.

read more:

Toyota Bonus Set 37.99

ZDMAK SPECIAL DEAL
Headbolt tool and Valve tools...
First Item: Valve tool designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe. In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness. Works especially well with 3S FE and 3S GELC Toyota DOHC.Toyota number 09248 55040For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.Packaged as shown with pliers and spacer wedge. Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 199

PLUS * Toyota Headbolt Tool
12 Point (Triple Square) Socket.
This item is called XZN (style) and is very hard to find. 1/2 Drive Socket is 100mm long, for easy access to hard to reach headbolts.

Headbolt Socket 17.50

This is the tool you are looking for.
Plus it is on sale!
Number T10070 Headbolt Tool 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socketThe old tool number was 3452 and is now discontinued..Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this a Polydrive.This is NOT a Torx socket although it is a 6 point tool.The points are more flat (squared off) than a torx.and it is NOT a XZN (tri square) Socket.

New Style Headbolt Polydrive 17.50

This is the tool you are looking for!
Plus it is on sale!
Number T10070 Headbolt Tool 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen AudiV6 and 4 Cylinder5 valve engines. Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socketThe old tool number was 3452 and is now discontinued..Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this a Polydrive.This is NOT a Torx socket although it is a 6 point tool.The points are more flat (squared off) than a torx.and it is NOT a XZN (tri square) Socket.

Audi Headbolt Tool 17.50

This is the tool you are looking for!
Plus it is on sale!
Number T10070 Headbolt Tool 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socketThe old tool number was 3452 and is now discontinued..Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this a Polydrive.This is NOT a Torx socket although it is a 6 point tool.The points are more flat (squared off) than a torx.and it is NOT a XZN (tri square) Socket.

Audi Headbolt Toolt 17.50

This is the tool you are looking for!
Plus it is on sale!
Number T10070 Headbolt Tool 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socketThe old tool number was 3452 and is now discontinued..Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this a Polydrive.This is NOT a Torx socket although it is a 6 point tool.The points are more flat (squared off) than a torx.and it is NOT a XZN (tri square) Socket.

Insulated Driver Set Made in Germany 48.50
Professional Quality Insulated Tool Set.Individually Tested Tools Certified To 1000 Volts.Tools Meet The Following Safety Specifications:ASTM F 1505 01 IEC 900 VDE 0682/Part 201 ISO 9001Certified Tools Meet OSHA Definition For Insulated Tool Requirements.Quality Tools Made In GermanyCVM Tool Steel Hardened To Average 58/60RC. 10 Piece Insulated Screwdrivers
Set Includes:Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 6.5 Phillips: 0, 1, 2, 3
read more:

Two Pickup Tools 9.99
RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.
read more:

Klein Tool Pouch 46.95
Klein Tool Pouch
Leather, 8 Pockets, Thong, Snap, Tunnel Loop
Leather construction. Provides space for an large number of tools. Riveted to assure long life.
Klein Tools product line includes virtually every major type of hand tool used in construction, electronics, mining, and general industry in addition to the electrical and telecommunications fields.Klein Tools also supplies a line of occupational protective equipment. Klein remains dedicated to supplying only the finest quality products.Made for professional users, Klein tools are available through stocking distributors worldwide.
read more:

Set 4 Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Set of Two Terminal Tools 29.50

Special Electrical Tools Terminal Tools Set of 2
Special Electrical Tool Terminal Tool Eliminate Damaged wires and Terminals. Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals.

Saab Set 3 Clutch Tools 13.99

Set of 3 Clutch Alignment Tools Covers a wide variety of Saab Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Set 3 Porsche Clutch Tools 13.99

Set of 3
Porsche Clutch Alignment Tools
Covers a BIG variety of Porsche Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Set 3 BMW Clutch Tools 13.99

Set of 3
BMW Clutch Alignment Tools
Covers a BIG variety of BMW Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Two Pickup Tools 5.50

RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.

More Tools 0.00

Be sure to look in the VOLKSWAGEN section for more tools. Plus you will find some sweet deals in the ZDMAK SPECIALS section, and in the TODAYS SPECIALS section. If you need something quickly please email or call. Expedited or Air shipments should be called in as early in the day as possible. I will do all I can to get you the tools you need or help you with your tool search.

Set 3 Audi Clutch Tools 13.99

Set of 3
Audi Clutch Alignment Tools
Covers a BIG variety of Audi (and many Volkswagen Applications).
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Set 7 Marking and Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Set of 6 Exhaust Tools 00
Item5965VA8DescriptionAssortment of 6 exhaust system tools
read more:

Shortie * Drain Plugs 3/8 Drive Tools 0.00

Serious Stubby Short Pattern 3/8 drive Hex Allen Drain Plug Sockets. Very Hard to find in this short version in a 3/8 drive. These tools will work well in a tight spot.
The larger 1/2 drive tools are too big for some applications.
Sizes available 17mm, 14mm, 13mm, 12mm, 10mm and 8mm.
Sold each or in a set of 6.

Extractor Tool Kabelex 00

Ejection extractor tools for contacts MAN/Volvo, DaimlerChrysler, BMW, Porsche, Volkswagen, Audi: tools for flat plug in sockets with asymmetrically positioned latches in terminals with single release, with two release channels,etc..
ClickHere for More Kabelex information. Extractor tools for soldered contacts, for Micro Timer I, cable extractor tools for Micro Timer II, III, Pit Pod contacts, Maxi Power Timer , SLK contactsetc...

XZN Tri Square Socket Set 34.50

XZN "Triple Square" Headbolt Bit Set of 4 pieces
Includes: 6mm, 8mm, 10mm & 12mm bits
with 3/8" Drive holders, on rail.A very handy set for the German car mechanic.

Ferrari Tools 00

If you would like a current sales flier on Beta Products and Tools please email with your complete mailing address and literature will be sent to you directly.
email: sales@zdmak.com

MoreBeta Ferrari Tools Here

Roll Up Pouch 6.99
Roll Up Pouch Only
DOES NOT INCLUDE TOOLS
PICTURE IS FOR REFERENCE ONLY
12 pocket pouch holds a variety of tools.
Great for auto and motorcycle use.
Made of heavy duty nylon fabric for long life.
Long web strap with velcro fastener keeps pouch closed tightly when not in use.
read more:

Cats Paw Capped Screwdrivers 43.50
6 Pc. Cats Paw Capped Screwdriver Set
Capped so you can strike with a hammer.
Phillips 1, 2, 3, Slotted 7/32", 1/4", 5/16"Blade extends throughout handle and is fully heat treatedTwo composite handle designed for user comfort and reduced hand fatigueCapped end Handle allows the user to strike the screwdriver without damaging the handleHex bolster for extra turning power.
Mayhew Tools has been manufacturing Punches and Chisels in the Western Massachusetts town of Shelburne Falls since 1856. As the oldest Punch and Chisel manufacturer in the U.S., Mayhew Tools has grown from a small tool house to the leader of the industry. Their product line has also grown to include an assortment of Wrecking and Prying Bars, Masonry Tools, Handguarded Tools, Screwdriver Type Pry Bars, Brass Punches, Pilot Punches, All Steel Wood Chisels, Nail Sets, Carbon Scrapers and Hollow Punches.
read more:

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Dogleg and 8mm Hex Set 29.50

Hex Tools (2) Dogleg Plus Regular 8mm Allen
Set of Two Tools Sturdy 1/2 Drive Dogleg (offset) 8mm Allen SocketApplicable: M116, 117
Overall length of the tool is 4 1/4 inches.
Tool used for R&R of cylinder head bolts.
Similar to Mercedes number 000 589 3407 00.
Plus 8mm (straight) standard Hex 1/2 drive.
Excellent tools for working on Mercedes and other German vehicles.

German Car Lovers Special 79.95

Very cool combo package (set of 3) for the German car mechanic.
You will get one of each set..the Stubby hex and the Stubby triple squares
and the standard triple squares (better for headbolts)
9 Pc Metric Hex Stubbies 1/4 Drive Set (Lower right side of image) great for working on German Cars. Sizes included: 2mm, 2.5mm, 3, 4, 5, 6, 7, 8, 10mm. S2 Alloy steel THE STRONGEST DRIVERS AVAILABLE. Drivers heat treated to 56 to 62 RC. Satin Chrome plating.
Plus
8 Piece Stubby XZN Triple Square Set 3/8 Drive (Upper right side of image) Sizes included:4mm, 5, 6, 8, 10, 12, 14 and 16mm Comes with the plastic carrying case.Sturdy compact One Piece design...SWEET.Satin Chrome with black impact tips.Super "New" S2 Alloy Steel. Fully Heat Treated
Plus
Standard XZN Triple Square Headbolt Bit Set of 4 (left side of image)
Includes sizes : 6mm, 8mm, 10mm & 12mm bits with 3/8" Drive holders comes on a rail.
A very handy set for the German car mechanic.
Dont miss out on this deal! You get all the tools in the image above!

Junior Tool Bag 27.99
Bucket Boss Brand GateMouth Jr. Tool Bags

Ideal for cordless power tools and accessories

Super wide "gate mouth" design

Size: 13" x 9" x 8"Product Description
From the Manufacturer
Just the right size for power tools. This bag is engineeredto do what the plastic or metal case provided with small power toolscant carry a cordless tool, battery charger, spare battery and a complete setof hand tools and accessories specific to the job. Foam padded sides and bottomprotect walls from dings, floors and counters from scratches. Interior andexterior tool pockets of various sizes will fit most tool combinations. RickDuckwear color scheme. A better way to carry small power tools, it also makes afine general tool bag. 6 exterior, 17 interior pockets. 13 in. L x 9 in. W x 8in. H.
read more:

XZN Triple Square Set 34.50

XZN "Triple Square" Headbolt Bit Set of 4 pieces
Includes: 6mm, 8mm, 10mm & 12mm bits
with 3/8" Drive holders, on rail.A very handy set for the German car mechanic.

Finding the Right Workshop Tool Just Got Easier
Every workshop operates under pressure. Having the right tools to tackle both routine and out of the ordinary jobs is key to safe and efficient working and keeping customers happy. Responding to this, Damar International Ltd, UK distributors for Hazet precision automotive tools from Germany, have put the entire 192 page catalogue on line at www.damar.biz and backed this up with expert phone support. (PRWEB Jul 16, 2006)
read more:

Set of 7 Suspension Tools 00
Item5965VA2DescriptionAssortment of 7 suspension tools
read more:

Cotton Wrench Roll Up 22.50

Tool Roll Wrench Roll Up Fits 3/8" to 1 1/4" or 6mm to 32mm wrenches Brass grommets to hang in shop Rolls up and ties for easy transport. Constructed from cordura and heavy duty nylon, the Wrench Roll features 14 pockets of different widths and depths to hold various hand tools like wrenches, ratchets, and extensions, and protect them against impact damage and clanging. When rolled closed, the Wrench Roll is secured with two ties that permit the user to make his Wrench Roll as small or large as his tools will allow. Can be stored inside larger tool bags or boxes. A very useful organization and storage pouch for your tools. This wrench roll up is designed specifically for wrenches, ratchets, ratchet extensions, and other relatively long and thin tools. Tools like pliers will not fit. This item is 27" wide side to side, 10" tall at the left, and 22" tall at the right. The smallest pocket on the left is 3" deep, and the largest pocket on the right is 14" deep.

Terminal Tool Wire Remover 13.99
Special Electrical Tools Terminal Tool Eliminate Damaged wires and Terminals.
Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals. See set of 2 below.
read more:

Canvas Tool Bag 22.25
Canvas Tool Bag
Features & Benefits:
Big enough to hold and keep all your necessary tools.
Internal metal frame holds bag wide open.
10 Outside pockets to organizes tools.
14 Inside pockets for accessories.
Built of rugged 20oz. canvas material with hard bottom for better stability.
12 inch Long x 10 inch Wide x 11 inch Height
read more:

RETAINER TOOLS 79.00

FACTORY TOOLS USED WITH ENGINE SUPPORT 10 222 WHEN REMOVING AND INSTALLING THE GEARBOX ON 16 VALVE ENGINES.

M10 Tri Square (Old Style) 14.99

Headbolt ToolTriple Square 12 Point (XZN) Socket
Sturdy 1/2 Drive Tool used for a wide variety of applications including headbolts.
Excellent for working on German vehicles.
This tool is 5 1/2 inches long and the shaft is 4 inches!

You Searched for

headbolt tools

Trade Links With ZDMAK