mercedes engine tool bmw engine tool -- mmk4mkt

36mm Oil Filter Wrench 39.99

BMWMINI COOPER TOOL Mercedes Benzdiesel oil filter wrench.
This is the same as Mercedes item 606 589 01 09 00. Works on BMW and Mercedes
This tool is 6 point size 36mm shallow socket 3/8" drive.
Heavy duty construction. It is made by Hazet for Mercedes and BMW.
Good for engine OM606 used in 1995 W124 E300 diesel, 96 97 W210 E300 diesel,
and 1998 E300 turbodiesel. Also for MB Diesel Engines OM604, OM605
and BMW Mini, BMW M52 6 Cyl., M60 8 cyl., M70 12 cyl and Volkswagen VR6.
Some other applications include:
Mercedes diesel engines: OM604, OM605, OM606 1995 W124 E300 diesel,
1996 97 W210 E300 diesel, 1998 E300 turbo diesel.
BMW Mini Cooper, BMW M52 6 cyl, BMW M60 8 cyl, BMW M70 12 cyl.
VW Volkswagen VR6
Ford Truck 6.0L 2003 thru 2004
High Quality Hazet Tool Made in Germany!

36mm Oil Filter Socket Wrench 39.99

3 Mercedes Tools 151.00

Set of Three including: Threaded Pin Wrench Socket (M0007) tool used for the proper R&R of threaded ring which secures prechamber in cylinder head. The Mercedes number for this tool is 615 589 0007 00
Applicable: OM601/602/603 engines through 1989 with vertical injection. Also OM615, OM616, OM617 Ref: 615 589 0007 00
Plus
Extractor Tip Double Ended (M0046) Used for the proper removal of prechamber from cylinder head. Used in conjunction with a slide hammer.
Applicable: Mercedes engine OM601, OM602, OM603, OM604, OM615, OM616, OM617. Ref: 902 589 0033 00
Plus
Slide Hammer use with Tool M0046 for proper removal of prechamber from cylinder head. Also other applications: Tool pulls dented sheet metal back into place. To use, drill a hole in the deepest part of the dent, insert the hook or self threading screw tip and tap lightly with the 2 1/2 lb slide hammer to remove the dent.
A 13' long shaft enables high pulling force. Slide hammer has 1/2 13 UNC thread.

End Play Kit 00
This tool has isdesigned to measure the end play movement
of the VW crankshaft without the use of a dial indicator.
All that is necessary is a feeler gauge set and this tool.
With the tool bolted to the end of the case, the feeler guage
measures the gap created by the end play.
The taking of this end measurement is necessary whenever a VW engine is rebuilt
to prevent the rear main bearing from seizing up.
A must for rebuilding one engine or many,
this tool works on all air cooled VW engines and Porsche 912 & 914 models.
read more:

Top Dead Center Indicator 14.50
Top Dead Center Indicator9710 Used for T.D.C. on any Gas engine.Simply unscrew a spark plug and twist the rubber hosepart of this tool into the spark plug hole.As you rotate the engine with a turning bar,the piston forces air through the whistle part of this tool.Once the whistling stops the engine is at T.D.C.
read more:

Mercedes 8mm Dogleg Allen 14.95

Sturdy 1/2 Drive Dog leg (offset) 8mm Allen SocketApplicable: M116, 117
1/2" drive
Overall length of the tool is 4 1/4 inches.
Tool used for R&R of cylinder head bolts.
Similar to Mercedes number 000 589 3407 00.

Benz Transmission Tool 49.95

Transmission Linkage Bushing Installer / Tool for Mercedes Benz with automatic transmissions, virtually all later models, some Ford and other vehicles needing this tool to easily and safely push TOUGH nylon bushings into place. Works on different bushing sizes. The design of this tool was initiated by Mr. Robert Allen and has recently been modified and perfected. Robert Allen is a long time Mercedes Benz Master Technician with 26 years of experience.

Holder Plate Only from Cam Kit 00

Plate appl:700, 800, 850, 900, 960, C70 Conv, C70 Coupe, S40, S70, S90, V40, V70 2000, V70 XC, V90
Engine:B4164S Engine:B4164S2, Engine:B4184S, Engine:B4184S2, Engine:B4184S3, Engine:B4194T, Engine:B4204S, Engine:B4204S2, Engine:B4204T, Engine:B5202FS, Engine:B5204FS, Engine:B5204FT, Engine:B5204T2, Engine:B5204T3, Engine:B5204T4, Engine:B5234FS,

Cam Adjustment Pieces Only * from Cam Kit 00

CAMSHAFT ADJUSTMENT TOOL
Same as Volvo 5452
700, 800, 850, 900, 960, C70 Conv, C70 Coupe, S40, S60, S70, S80, S90, V40, V70 2000, V70
Engine:B4164S Engine:B4164S2, Engine:B4184S, Engine:B4184S10, Engine:B4184S2, Engine:B4184

Spring Compressor Kit 269.00

Special Low Price
Mercedes Coil Spring Compressor Kit
For front and rear coil springs.
Applicable: Mercedes chassis W107, W116, W123, W124, W126, W129, W140, W201, W202.
Comes with a convenient carrying case.
Ref: 924 589 0231 00
Call if you have any questions about this tool or any other tool.

Dogleg and 8mm Hex Set 29.50

Hex Tools (2) Dogleg Plus Regular 8mm Allen
Set of Two Tools Sturdy 1/2 Drive Dogleg (offset) 8mm Allen SocketApplicable: M116, 117
Overall length of the tool is 4 1/4 inches.
Tool used for R&R of cylinder head bolts.
Similar to Mercedes number 000 589 3407 00.
Plus 8mm (straight) standard Hex 1/2 drive.
Excellent tools for working on Mercedes and other German vehicles.

Mercedes and BMW Set 89.50

ON SALE 7 Pc Benz and BMW Tools Including 4 Mercedes Tools a BMW Holding Tool plus 2 Thin Wrenches.
Benz Tools are:
1.Hub Securing Bar 113 0040 Used for securing Waterpump hub from rotating during R&R of Fan clutch nut. This holder bolts onto the hub, as the poly v belt is not in place and cannot be used to lock the hub. Applicable:M112 & M113

2.Locking Hook needed for securing the visco fan couplingduring R&R of 8mm hex fastener w/o removing the radiator: Mercedes M103.

3.Wrench / Holding Bar. This is similar to Benz Number 900 589 0307 00 Comes complete with 8 and 10mm Allen bits.The 8mm is needed for R&R of fan clutch fastenerApplicable M103, 104, 111, 119, 120 OM 602, 603, 605, 606The 10mm is used for adjusting A/C belt tension and R&R of idler pulleyModels 420, 560 with V 819 86 and Newer
4. Thin Wrench 65mm with an 8mm overall thickness and an overall length of 16 inches for proper leverage. Mercedes ref: 120 589 0201 00

BMW Double Waterpump ToolThis special tool covers most popular applications used for securing Water Pump Hub from rotating during R & R of Fan Clutch NutApplicable:M10, M20, M30, M40, M41, M42, M50, M60, M62

Press Set 2 Only * from Cam Kit 00

Press tools (pair) appl: 700, 800, 850, 900, 960, C70 Conv, C70 Coupe, S40, S60, S70, S80, S90, V40, V70 2000, V70 2000 , V70 XC, V70 XC 2001 , V70 XC 2001 / XC70, V90, XC90,
Engine:B4164SEngine:B4164S2, Engine:B4184S, Engine:B4184S10, Engine:B4184S2, Engine:B4184S3, Engine:B4184S9, Engine:B4194T, Engine:B4194T2, Engine:B4204S, Engine:B4204S2, Engine:B4204T, Engine:B4204T2, Engine:B4204T2 CVVT, Engine:B4204T3, Engine:B4204T3

Fuel Tool Mercedes Benz 39.50

Cup Wrench for Mercedes W202. Used to remove fuel sender retainer.

T30 Airbag Torx Bit 8.50
Long Torx Bit T30
Airbag Tool Torx (6 Point) Overall Length is 4 inches. Super High Quality Tool for BMW, Mercedes and VW.
read more:

Mercedes Socket 45.50
Mercedes Diesel Injection Pump Socket
M0019Mercedes 32 Point Female Socket with 1/2" drive, This socket is used for the R&R of delivery valve of diesel injection pump.Applicable: Mercedes diesel engines.
Ref: 617 589 0109 00
read more:

End Play Kit 16.95

This tool has isdesigned to measure the end play movement
of the VW crankshaft without the use of a dial indicator.
All that is necessary is a feeler gauge set and this tool.
With the tool bolted to the end of the case, the feeler guage
measures the gap created by the end play.
The taking of this end measurement is necessary whenever a VW engine is rebuilt
to prevent the rear main bearing from seizing up.
A must for rebuilding one engine or many,
this tool works on all air cooled VW engines and Porsche 912 & 914 models.

Top Dead Center Indicator 14.99

Top Dead Center Indicator9710 Used for T.D.C. on any Gas engine.Simply unscrew a spark plug and twist the rubber hosepart of this tool into the spark plug hole.As you rotate the engine with a turning bar,the piston forces air through the whistle part of this tool.Once the whistling stops the engine is at T.D.C.

Red X Dog for Mercedes 220.00

This Mercedes reset tool can do more than other reset tools!
First, it provides you with the capability of resetting the service reminder displays.
In addition, you can also reset airbag faults and turn off the airbag (SRS) indicator. Applicable: 163 ML Class, Light Truck

Mercedes Locking Nut 39.95
Locking Nut M0039needed for securing the diesel injection pump cam shaft.Applicable:Mercedes OM601, OM602, OM603, OM605, OM606, OM617.Benz Ref: 601 589 0521 00
read more:

Door Handlle Hinge Kit 79.50
Tool Kit for BENZ , VW , AUDI , PORSCHE door hinge/handle installer & remover.
Finally, a compact solution to accessing the special features found on the door hinges and door handles of VW/Audi, Mercedes Benz and Porsche, includes 4 door hinge bits (less than 1 inch long) with slender ratcheting wrench and extra long drivers for accessing Mercedes and VW door handle fasteners.
read more:

Long Torx Bit T30 Airbag Tool 6.99

Long Torx Bit T30
Airbag Tool Torx (6 Point) Size T30
Overall Length is 4 inches. Quality Tool for BMW, Mercedes and VW.
High grade tool steel bits,
hardened for ultimate wear resistance.

T30 Airbag Tool Torx Bit 8.50

Long Torx Bit T30
Airbag Tool Torx (6 Point) Overall Length is 4 inches. Super High Quality Tool for BMW, Mercedes and VW.

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Grand Master! Radio Tool Set 34.99

Master Radio Removal Tool Set
18 Piece Set includes the following tools needed to install and remove radios :. 2pc. Radio Removal U Hook (Ford/VW/Audi/Grundig/Blaupunkt) . 1pc. Special Pentagon Wrench (BMW). 4pc. Radio Removal Keys (VW/Audi/Becker/Mercedes Benz) . 2pc. Radio Removal Keys (Mercedes Benz/Porsche/Becker). 2pc. Radio Removal Keys (VW). 1pc. Allen Hex Wrench (BMW/Opel). 2pc. Radio Removal Keys (New Becker). 2pc. Radio Removal Keys (New Skoda). 2pc. Radio Removal U Hook (New Blaupunkt)

Special Adaptor Ring * 154.50

New Porsche Adaptor Ring
For the budget minded Porsche & VW air cooled engine rebuilder...Check it out.....
This Ring (same as the one equipped on the factory style Engine Holding Fixture P201)
is void of any holding or securing tubes.
This adaptor ring is specifically designed to mate the engine case straight to any universal engine stand, using four 3/8" Bolts,
thus allowing for a full 360 degree rotation of the engine.
This ring is designed to bolt up to every Porsche and VW fully dressed air cooled engine ever produced.
It is machined with all the necessary reliefs and/or notches to allow for clearance of all engine parts, including the flywheel and its respective lock tool (VW Flywheel lock 215). Call Zdmak 877 938 6657.

Pin Only from Cam & Crank Kit 00

Pin Only Appl: 700, 800, 850, 900, 960, C70 Conv, C70 Coupe, S40, S60, S70, S80, S90, V40, V70 2000, V70
Engine:B4164S Engine:B4164S2, Engine:B4184S, Engine:B4184S10, Engine:B4184S2, Engine:B4184

LightOff for Mercedes 229.00

Individual Oil Service/Inspection light, SRS (Airbag) reset tool.This unit provides you with the capability of resetting the oil service reminder, in miles and days for the next service.
In addition, you can also reset SRS (airbag) faults (and its dashboard indicator)
on all Mercedes with diagnostic capabilities, and the 38 pin diagnostic connector (excluding the M Class Light Truck, Model 163).
Applicable: Chassis 124, 129, 140, 163, 170, 202, 208, 210, 463, vito, Sprinter

Professional Engine Holder Complete 550.00
Engine Holding Fixture Designed to securely carry the entire weightof a fully dressed air cooled twin turbo Boxer 6.Engine Holding Fixture will allow a full 360 degree rotation of engine,with Flywheel Lock allowing for R&R of engine.Bolts up to every Porsche and VW air cooled Boxer ever produced.From Type 1 up to 3.6LItems included in this kit are: P201, VW313 and VW215.
read more:

22mm Lambda Tool 96.99

4681 1 Open Box Wrench 22mm chrome plated,
10 offset, with square connection 9 x 12 mm
for using with HAZET 6396,
For Lambda probe on VW AUDI, engine BMW M 70,
750i, 320, 325 M 20 engine, 316, 318 M 43 engine,
FORD Fiesta 1.1 and 1.6 l, Escort Orion 1.4 l

Hazet Oil Service Tool 29.50

Oil service Wrench 74mm with 14 Points (inside flats flutes).
Some applications include: Mercedes, Audi, VW Golf,
and new body Jetta, TDI (Diesel) and the following gas vehicles;
Passat, Golf and Jetta with 1.8 turbo and 2.0 litre, Rabbit, Dasher, Scirocco,and New Beetle.
Mercedes M104, M110, M111, M119, M120 C, E
Porsche 944 and 924. 
Some Toyota (Filter 08922 0211 etc...)
Can also be used on BMW Top of housing 1.9L M44
Super High Quality Original Factory Tool Made in Germany!
Clickhere to see a detailed Application ChartMeasure filter diameter canister diameter or Check yourmanuals for details and size needed.

Cam Bar and Pin for 2 Valve 139.50

Camshaft TimingTool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4  94 97 AFC Engine

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6

Please note: 3243 for 2 valves per cylinder. 

Cam Bar and Pin for 2 Valve 139.50

Set 3 Valve Tools 105.50
VALVE ADJUSTING TOOL SET OF 3
Valve adjusting on the Rabbit, Scirocco, and Jetta 1 requires the use of a special tool to hold the cam followers in the down position in order to remove the shims for replacement. The valve adjusting pliers are then used to remove the shim. Note: The 1.6 and 1.7 liter engines use a different tool than the 1.8 liter engine becuase of valve spacing. The Shim Set works on all solid lifter cylinder heads.
read more:

Finger Tip Spark Plug Tool 00

Finger Tip Spark Plug Tool.
For deep seated plugs in tight engine compartments.

read more:

ENGINE SLING 0.00

2024A FACTORY TOOL USED TO REMOVE AND INSTALL ENGINE

Valve Tool for Volkswagen 61.95

Valve Tool for Volkswagen Valve Tool for VolkswagenThis unique tool has been designed to allow removal and installation of valve springs while the engine is still in the carType I, II III engines 40 HP and laterThis set will also remove springs on disassembled engines.

Special Rivet Tool 0.00
Special Rivet Tool
Plier with 90 degree rotating head.
Tool used to remove two piece reusable plastic rivets
found on door panels, engine shields, wheel well shields etc.
For undivided rivets the Plier can also be used for cutting the head off the rivet.
Easy to use universal Plier eliminates damage to trim and door facings.
read more:

Support Frame 85.00

Engine Bracket Original Factory Tool Made in Germany: USE FOR SUPPORTING W8 ENGINE

Pin Wrench Set 2 49.00

This is the Best Quality Set of the two CRUCIAL VW Audi Pin Wrenches you will find anywhere.
SUPER HIGH QUALITY TOOLS (BOTH) MADE IN GERMANY BY HAZET.
First item is number V159 (this is a smaller tool on the left side picture is not to scale) This tool is for easy adjustment of Camshaft spur belts
(toothed belt) on idler pulleys with Pin holes. This wrench with its protruding pins, grabs the center
of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment.
Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80
Distance of pins 18 mm, diameter of pins 2.9 mm for deep located idler pulley
on toothed belt on 1,6 l diesel engine VW van T3 (up to model 1991).
V159 is the correct number the old VW Number on this (smaller) tool was 2587.

T10020 Special wrench with an offset (angled) head (Larger tool on right side of image)
This tool also used for adjusting timing belt tension.
99 and later VW Golf, VW Jetta and Beetle with 2.0 Litre Gas and 1.9 Litre TDI Engines.1999 and newer Golf, Jetta
New Beetle with 2.0l gas engine and 1.9l T.D.I. Diesel engine. You will get both tools with this purchase.

36mm Oil Filter Wrench 15.99

Special 36mm Oil Filter Wrench Removes and installs filters on BMW Mini Cooper. The low profile socket fits 36mm fuel and oil filters. The low profile socket works in confined spaces. 3/8 in. drive Not for use with an impact wrench.
BMW Mini Cooper, BMW M52 6 cylinder, BMW M60 8 cylinder, BMW M70 12 cylinder.
Mercedes Benz diesel engines: OM604, OM605, OM606 (1995 W124 E300 diesel, 96 97 W210 E300 diesel, 1998 E300 turbodiesel).
Same as Mercedes tool number: 606 589 01 09 00VW Volkswagen VR6
Also for Ford Truck 6.0L 03 04

Transport Brackets 59.10

Engine Brackets Original Factory Tool Made in Germany: USED WHEN REMOVING AND INSTALLING W8 ENGINE ON PASSAT.

MULTI SERVICE INTERVAL RESET TOOL 389.00

MULTI SERVICE INTERVAL RESET TOOL Number OR300 Reset tool is necessary for workshops to maintainand reset Mercedes Benz, BMW, Volvo, VW/Audi vehicles.With the large LCD display and the individual professional connectors, anyone can operate this tool clearly and easily just follow the instructions on the display.Convenient professional package comprises of the base unit, individual diagnostic connectorsand instruction manual in a small carrying case.
Readabout it Here

Neway Valve Seat Cutter 0.00
Neway Valve Seat Cutter
Neway has been in business since 1952 manufacturing and distributing tools and equipment for valve seat reconditioning and valve reconditioning.The "trademark" product is the Neway valve seat cutter. Neway seat cutters are almost standard equipment in any machine shop that services four stroke engines whether the work is small engine repair, automotive high performance, routine motorcycle maintenance, or heavy duty engine rebuilding. Neway offers value. It is extremely easy to use and accurate enough to be the tool of choice for high performance engine work, and it does not require a major investment.
For More info call or email.
read more:

Bar and Pin for 5 Valve 139.50

Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6Please note: 3391 for 5 valves per cylinder.

10mm Glow Plug Tool 69.99

10mm Universal Glow Plug Socket mainly for VW Audi Diesel Injection TDI 3/8 Drive.
High quality tool
Made in Germany by Hazet!
DETAILS: ALFA ROMEO, AUDI, CHRYSLER, FIAT, FORD, MERCEDES, LAND ROVER, RENAULT, SEAT, VOLKSWAGEN.

Spark Plug Wire Pliers 19.99
Spark Plug Wire PliersITEM ZDM M104 0037XUsed to remove the newer high voltage type wiresWide grip section and special angle.makes it easy to remove wires without separating crimps.Same as Mercedes Tool Number 104 589 0037 00 Applicable: 102, 103, 104, 110, 115, 116, 117, 119, 120
read more:

Passat Seal Tool 19.50

T10249 Made in Germany
Used for sealing lines when removing additive reservoir.Passat 4 cyl. diesel engine (2.0 ltr. engine)

Mercedes Tension Chain 0.00

Tension Chain for pressing out the drive shaft on Mercedes C class 4matic type 203.
Overall length is 216mm.

T10004 59.50

Original Factory Tool T10004 PIN WRENCH USAGE: Used for removing and installing and tensioning of toothed belt on Jetta 2.0 Liter SULEV engine with engine code BBW. Made in Germany.

You Searched for

mercedes engine tool

Trade Links With ZDMAK