porsche engine tool ORDER porsche engine tool audi engine tool -- mmk4mkt

Special Adaptor Ring * 154.50

New Porsche Adaptor Ring
For the budget minded Porsche & VW air cooled engine rebuilder...Check it out.....
This Ring (same as the one equipped on the factory style Engine Holding Fixture P201)
is void of any holding or securing tubes.
This adaptor ring is specifically designed to mate the engine case straight to any universal engine stand, using four 3/8" Bolts,
thus allowing for a full 360 degree rotation of the engine.
This ring is designed to bolt up to every Porsche and VW fully dressed air cooled engine ever produced.
It is machined with all the necessary reliefs and/or notches to allow for clearance of all engine parts, including the flywheel and its respective lock tool (VW Flywheel lock 215). Call Zdmak 877 938 6657.

Flywheel Lock 22.95
215 Volkswagen Porsche Tool
Flywheel Lockused to secure the crankshaft from rotating during R&R of motor.
Used in conjunction with Engine Holding Fixture P201,
where Flywheel Lock bolts into a machined channel.
All Porsche and VW 6V or 12V, air cooled.Please note: This item is included in the complete kit also.
read more:

944 Tool Set 60.50

Set of two tools for 944
Flywheel Lock needed to stop the motor from rotating during removal and replacement of crankshaft bolt or motor. Applicable: Porsche 944.

Alignment Pin ZDMAK number P218 Same as Porsche Tool 9215.
Alignment Pin crucial in order to properly reinstall the oil filter/water intercooler housing.
Not using this Alignment Pin may cause misalignment during this procedure, which may lead to the oil pressure relief valve sticking and ultimately engine damage.
Applicable: Porsche model 944 from 1983 to 1986.

End Play Kit 16.95

This tool has isdesigned to measure the end play movement
of the VW crankshaft without the use of a dial indicator.
All that is necessary is a feeler gauge set and this tool.
With the tool bolted to the end of the case, the feeler guage
measures the gap created by the end play.
The taking of this end measurement is necessary whenever a VW engine is rebuilt
to prevent the rear main bearing from seizing up.
A must for rebuilding one engine or many,
this tool works on all air cooled VW engines and Porsche 912 & 914 models.

Professional Engine Holder Complete 550.00
Engine Holding Fixture Designed to securely carry the entire weightof a fully dressed air cooled twin turbo Boxer 6.Engine Holding Fixture will allow a full 360 degree rotation of engine,with Flywheel Lock allowing for R&R of engine.Bolts up to every Porsche and VW air cooled Boxer ever produced.From Type 1 up to 3.6LItems included in this kit are: P201, VW313 and VW215.
read more:

Alignment Pin Drift 19.95

Same as Porsche Tool 9215Alignment Pin crucial in order to properly reinstall the oil filter/water intercooler housing.Not using this Alignment Pin may cause misalignment during this procedure,which may lead to the oil pressure relief valve sticking and ultimately engine damage.Applicable: Porsche model 944 1983 '86.

Relief Valve Tool 30.50
P236 Pressure Relief Valve Extractor Extractor the proper extraction of the from engine case. All Porsche VW Boxer 4
read more:

Top Dead Center Indicator 14.50
Top Dead Center Indicator9710 Used for T.D.C. on any Gas engine.Simply unscrew a spark plug and twist the rubber hosepart of this tool into the spark plug hole.As you rotate the engine with a turning bar,the piston forces air through the whistle part of this tool.Once the whistling stops the engine is at T.D.C.
read more:

36mm Flare Wrench 42.50
Special 36mm Flare Wrench like vw 179.Oil Line 12 Point Wrench for servicing Oil Lineson most 1977 and Later Porsche 911 and 944 Turbo.This tool is also used for adjusting rear suspension heighton 77 and Newer Porsche 911and for camber on most late model Volkswagen Bug.
read more:

Holder Plate Only from Cam Kit 00

Plate appl:700, 800, 850, 900, 960, C70 Conv, C70 Coupe, S40, S70, S90, V40, V70 2000, V70 XC, V90
Engine:B4164S Engine:B4164S2, Engine:B4184S, Engine:B4184S2, Engine:B4184S3, Engine:B4194T, Engine:B4204S, Engine:B4204S2, Engine:B4204T, Engine:B5202FS, Engine:B5204FS, Engine:B5204FT, Engine:B5204T2, Engine:B5204T3, Engine:B5204T4, Engine:B5234FS,

B90 Sub Kit for Porsche 160.00

PORSCHE B90 SUB KITS
There are Three different Sub Kits available for Porsche:
PORSCHE EARLY
PORSCHE LATE
PORSCHE TURBO
Details:
NUMBER B90 P1 FOR 911 1973 OLDERand for 914 , 912 C4 Front wheel bearing only 1989 and newer.
ITEM NUMBER B90 P 2 for 911 (non Turbo) 1974 and newer 924, 944 1985 and newer 968 and boxster.
ITEM NUMBER B90 P 3 for 911 Turbo 1990 and newer 928

Cam Adjustment Pieces Only * from Cam Kit 00

CAMSHAFT ADJUSTMENT TOOL
Same as Volvo 5452
700, 800, 850, 900, 960, C70 Conv, C70 Coupe, S40, S60, S70, S80, S90, V40, V70 2000, V70
Engine:B4164S Engine:B4164S2, Engine:B4184S, Engine:B4184S10, Engine:B4184S2, Engine:B4184

Oil Seal Tool 42.50
Porsche Volkswagen Tool like 204BUsed for proper installationof oil seal on flywheel side of crank shaft. All VW Boxer 4.
read more:

Set 2 Alternator Tools 47.00

Combo Socket Set of 2 consisting of the 17mm Multi Spline Adapter and XZN (12 Point) Socket size M10 for mounting and dismounting the alternator pulley at the generator.Volkswagen Audi Mercedes Porsche etc...For mounting the V belt pulley (slip clutch pulley) at the alternator (manuals call it a generator), especially for T.D.I. VW Golf III, Vento, Passat and AUDI A 3 .
The short serrated socket (3400) is size 17MM outside diameter and Length is 30mm.
The larger tool is M10 XZN triple square and is 1/2 drive x 140mm Length.Also for Boxster. (See repair Group 27 (Porsche Bulletins) Boxster Alternators with free wheeling Pulleys. High Quality Tool

Also: 1990 to 1994 porsche C2 and C4 and all porsche 993s use a (M10) 10mm 12point socket tool to hold the alternator shaft when replacing the belts the area between the alternator and car body is very limited a 10mm 12point spanner style wrench works well for this job.

Press Set 2 Only * from Cam Kit 00

Press tools (pair) appl: 700, 800, 850, 900, 960, C70 Conv, C70 Coupe, S40, S60, S70, S80, S90, V40, V70 2000, V70 2000 , V70 XC, V70 XC 2001 , V70 XC 2001 / XC70, V90, XC90,
Engine:B4164SEngine:B4164S2, Engine:B4184S, Engine:B4184S10, Engine:B4184S2, Engine:B4184S3, Engine:B4184S9, Engine:B4194T, Engine:B4194T2, Engine:B4204S, Engine:B4204S2, Engine:B4204T, Engine:B4204T2, Engine:B4204T2 CVVT, Engine:B4204T3, Engine:B4204T3

Sprocket Holder 47.50

Same as Porsche Tool 9200Locking Bar needed to properly secure the balance shaft sprocketfrom rotating during R&R of retaining bolt.Applicable: Porsche 944.

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Porsche Hub Wheel Bearing 220.00

B90 Porsche Main Kit Hub/Wheel Bearing R&RDesigned to accurately and efficientlyExtract or Install the Wheel Bearing and Hub of spindle assemblies.Applicable: all 911, 912, 914, 924, 928, 944, 968and Boxster with S.R.W.B. and I.R.S.Excluding* Hubs of 914 and 356 Sub kits are below for specific Porsche Models.Email with any questions.Pictures are for reference only.

Spring Clips 2.50
P241 Spring Clips like vw 171Used for securing cam followers within crank case half during assembly. Applicable: Porsche model 356, 912, 914.Every VW air cooled engine.
read more:

Top Dead Center Indicator 14.99

Top Dead Center Indicator9710 Used for T.D.C. on any Gas engine.Simply unscrew a spark plug and twist the rubber hosepart of this tool into the spark plug hole.As you rotate the engine with a turning bar,the piston forces air through the whistle part of this tool.Once the whistling stops the engine is at T.D.C.

World Famous Assistent 775.00
Rolling Tool Box
Hazet World Famous Assistent
With collapsible swinging down pillars
to reduce the height to a space saving minimum (642 mm).
Super High Quality German made tool box number 166C.
The favorite of Porsche owners everywhere!
read more:

Super Strong 30 X 32mm 27.50

Big Sucker! Metric Thin Wrench 32 x 36mm with just over a 1/4 inch (8mm) thickness and overall length of 13 1/2 inches for proper leverage. This is a STRONG BEEFY tool you will like. A very good tool for the experienced technician and should be one of the first items a new tech will purchase. All European auto techs need thin wrenches and this is one the best values on the market and it is a heavy duty tool that will pay for itself very quickly. For use on Oil Lines, Fan Clutch work, A/C and Transmission work. These thin wrenches are becoming more and more necessary every day. Some applications include: Mercedes and BMW R&R of fan clutch hub nut. The 32mm is used for R&R of tie rods Porsche model 911 Turbo, 1976 89and the 36mm is needed for proper adjustment of rear ride height Porsche 911 1977 89 etc...This item is on sale now.

Gauge Holder 37.00
Dial Gauge Holder P240 Used to properly measure crank shaft flywheel and pulley end play.Can also be universally to check clearances and run out.Applicable: Most Porsche and VW air cooled engine.
read more:

Porsche Buyers Guide 10.75

About this title: Dean Batchelors classic Illustrated Porsche Buyers Guide is completely revised and updated by Randy Leffingwell, author of Porsche Legends. This edition includes all the new Porsches introduced since the 1989 third edition including the newest 911s, the incredible Boxster, the 959, and the 968. Porsche owners, prospective buyers, and enthusiasts who simply admire Porsche craftsmanship and performance will appreciate the details covered in the revised text with its buying tips and in depth information arranged year by year and model by model.

Door Handlle Hinge Kit 79.50
Tool Kit for BENZ , VW , AUDI , PORSCHE door hinge/handle installer & remover.
Finally, a compact solution to accessing the special features found on the door hinges and door handles of VW/Audi, Mercedes Benz and Porsche, includes 4 door hinge bits (less than 1 inch long) with slender ratcheting wrench and extra long drivers for accessing Mercedes and VW door handle fasteners.
read more:

Porsche Adjusment Kit 46.50
911 Adjusment Kit
3 Piece Adjustment Tool Kit
Designed to adjust the mechanical injection pump for performance emission tuning. Applicable 911 69 thru 73.
read more:

Flywheel Lock 00
Universal Flywheel Lock
Designed for use on all air cooled Volkswagen engines
Type 1, 2, 3, & 4 and on all air cooled Porsche engines
(series 356, 912, 914, & all 911s through 1969).
This tool is a must when changing a flywheel or its seal
and it comes in handy when changing a clutch.
Made from a forging, this quality tool will last a lifetime.
read more:

Puller 27.99
P229X Distributer Drive Gear Puller Puller used for the proper extraction of the Distributer Drive Gearfrom engine case. All Porsche VW Boxer 4
read more:

911 Oil Service Tool 38.00

Porsche 911 Tool.
Hazet Oil Filter Wrench size 92mm.
With square drive nominal size 12.5 = 1/2 inch.
outside hexagon 27 mm.
15 point (inside flats or flutes)
For 911 and several other vehicles such as Saab 900, 9000 and 99 etc...
High Quality Tool Made in Germany.

Ferrari Magnetic Wrench 29.99
17mm Magnetic Box V WrenchUsed for securing the top engine bolts from rotatingduring R&R of motor from transmission.Applicable: Porsche, VW and Ferrari modelsusing 17mm connecting bolts with a Hex Head
read more:

Pin Only from Cam & Crank Kit 00

Pin Only Appl: 700, 800, 850, 900, 960, C70 Conv, C70 Coupe, S40, S60, S70, S80, S90, V40, V70 2000, V70
Engine:B4164S Engine:B4164S2, Engine:B4184S, Engine:B4184S10, Engine:B4184S2, Engine:B4184

Spring Loaded Gauge 46.50

P228 Spring Loaded Gauge Spring Loaded Gauge Displays valve spring height using pre calibrated indicatorsstamped onto the outside surface of this tool. Crucial for accurate valve spring adjustment.Applicable: Porsche 911.Same as Porsche P10C

Ball Joint Pin Wrench Socket 55.95

Porsche Reference Number for this tool is P280B. ZDMAK Number P210
Pin Wrench Socket with 1/2" drive and a pin reinforcement sleeve,needed for the proper R&R of ball joint nutsw/o damage to the Pin Wrench Socket or nut.911 Porsche 1965 89912, 914

Heavy Duty 8mm Allen 27.95

Multiple applications for this handy tool.
Super Duty 8mm Allen Item P243 Extra Long 3/8 Drive SocketThis 8mm Extra Long Allen Socket is a solid one piece construction.Overall length is 7.75 inches.Used for R & R of some Benz Cylinder Headbolts,and some BMW C.V Joint Bolts,and Porsche Heat Exchange Exhaust sysetms 911 930 Porsche

Hub Wheel Bearing R&R Kit 220.00

B90 Hub/Wheel Bearing R&R Kit 220.00

Heavy Duty Bench Clamp 187.50
313 Volkswagen Porsche Tool Designed for to securely carry the full weightof an air cooled twin turbo Boxer 6Tool Number VW 313Properly suited for a work bench.
read more:

Tie Rod Tool 49.99

Tie Rod Tool VW 1014Separator used for disassembly of pitman arm type tie rod endswithout tearing the ball joint boots. Opening size is 25mm.Most VW Audi & Late Porsche models.
Clickhere for a Diagram on this tool.

22mm Lambda Tool 96.99

4681 1 Open Box Wrench 22mm chrome plated,
10 offset, with square connection 9 x 12 mm
for using with HAZET 6396,
For Lambda probe on VW AUDI, engine BMW M 70,
750i, 320, 325 M 20 engine, 316, 318 M 43 engine,
FORD Fiesta 1.1 and 1.6 l, Escort Orion 1.4 l

Rivet Driver Hubcap Tool 25.50
Rivet Driver P217 Driver needed to properly secure spring clipsonto the rim which holds the hubcap on the wheel.Applicable: Correct wheel setup for all Porsche 356 modelswith drum brakes and VW 1967 and older. The end w/o a "divot" in it gets secured into a vise which should be secured onto a workbench.You hold the steel wheel over the vertical standing Rivet Tool and place a rivet into the divot end of the tool.
Then, BLAMO with a hammer, thus securing Hub Cap steel spring onto the steel wheel via the rivet.When the rivet is secured into the steel wheel, you have to flare out the back end of it so the rivet doesnt work its way out.
read more:

Triple Square Drain Plug Tool 49.50

This is a Special Tamperproof * Transmission Drain Plug Socket. Triple Square ( 12 Point XZN 16) Same as old Volkswagen Tool 3357. (Number 3357 is still found in many/most manuals for this job)
Applicable Porsche Boxster and Audi A4 A6 and Passat. This is an excellent high quality tool Made in Germany. Plug not included, picture is for reference only.

Cam Bar and Pin for 2 Valve 139.50

Camshaft TimingTool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4  94 97 AFC Engine

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6

Please note: 3243 for 2 valves per cylinder. 

Cam Bar and Pin for 2 Valve 139.50

Set 2 Tie Rod Tools 89.00

Set of 2 Pullers including:
Large Tie Rod Tool VW 1014 Separator used for disassembly of pitman arm type tie rod ends without tearing the ball joint boots. Opening size is 25mm. Most VW Audi & Late Porsche models.

PLUS *

Puller P266HX Separator used for disassembly of Pitman arm type tie rod ends without tearing the boots. Opening size is 18mm. Most VW Audi Late Porsche models.

Set 3 Valve Tools 105.50
VALVE ADJUSTING TOOL SET OF 3
Valve adjusting on the Rabbit, Scirocco, and Jetta 1 requires the use of a special tool to hold the cam followers in the down position in order to remove the shims for replacement. The valve adjusting pliers are then used to remove the shim. Note: The 1.6 and 1.7 liter engines use a different tool than the 1.8 liter engine becuase of valve spacing. The Shim Set works on all solid lifter cylinder heads.
read more:

Finger Tip Spark Plug Tool 00

Finger Tip Spark Plug Tool.
For deep seated plugs in tight engine compartments.

read more:

Set 3 Porsche Clutch Tools 13.99

Set of 3
Porsche Clutch Alignment Tools
Covers a BIG variety of Porsche Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

ENGINE SLING 0.00

2024A FACTORY TOOL USED TO REMOVE AND INSTALL ENGINE

Valve Tool for Volkswagen 61.95

Valve Tool for Volkswagen Valve Tool for VolkswagenThis unique tool has been designed to allow removal and installation of valve springs while the engine is still in the carType I, II III engines 40 HP and laterThis set will also remove springs on disassembled engines.

Special Rivet Tool 0.00
Special Rivet Tool
Plier with 90 degree rotating head.
Tool used to remove two piece reusable plastic rivets
found on door panels, engine shields, wheel well shields etc.
For undivided rivets the Plier can also be used for cutting the head off the rivet.
Easy to use universal Plier eliminates damage to trim and door facings.
read more:

You Searched for

porsche engine tool

Trade Links With ZDMAK