saab tools audi diesel tools -- mmk4mkt

Saab Pin Wrench 18.50

Used for R and R of the triangular nut which secures the ignition lock support cover.
Lifetime Warranty Applicable:Saab 99 1971 1980 Saab 900 1979 1991

Saab Repair Pin Wrench 18.50

Used for R and R of the triangular nut which secures the ignition lock support cover.Lifetime Warranty Applicable:Saab 99 1971 1980 Saab 900 1979 1991

Saab Fuel Tank Lid Tool 00

Saab Fuel Tank Lid Tool
Applicable: SAAB model 900. Used to remove & install the plastic fuel tank lid.

Saab Clutch Spacer 24.99

Saab Clutch Spacer for AP / BORG BECK ONLY(Picture is for reference not actual tool)

Saab Clutch Spacer 15.50

Saab Clutch Spacer for 1976 and newer 900 and 99 Models tool used for clutch ring support during removal or replacement.

Saab Brake Piston Turning Tool 25.50

Turning Tool needed for rotating the piston backinto the brake caliper when replacing brake pads.Applicable: Saab models '87 and older. Excluding 9000 series

Saab Rigid Valve Spring Compressor 58.50

This Unique "On the Car" Rigid Valve Spring Compressor was designed to do away with conventional Lever based or C Clamp type mechanisms. The side by side threaded compressors inherent design allows the technician to have hands free to work with, and safely and easily maintain the Valve Spring to a fully compressed position, and to repair Valve Stem Seals without removing the Heads. This unit will cut repair time considerably.Will work on Saab 900, 9000, 9 3, 9 5 Double Overhead Cam Engines From early to later models.

Set 2 Power Lifter Pickup Tools 38.00
Set of 2 * Pick up Tools
One 19 inch long with lift cap 1.5lbs.
One 2 feet long with 3 lbs. capacity.

Please note: picture is for reference only.

Tools are also sold separately below.

read more:

Insulated Driver Set Made in Germany 48.50
Professional Quality Insulated Tool Set.Individually Tested Tools Certified To 1000 Volts.Tools Meet The Following Safety Specifications:ASTM F 1505 01 IEC 900 VDE 0682/Part 201 ISO 9001Certified Tools Meet OSHA Definition For Insulated Tool Requirements.Quality Tools Made In GermanyCVM Tool Steel Hardened To Average 58/60RC. 10 Piece Insulated Screwdrivers
Set Includes:Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 6.5 Phillips: 0, 1, 2, 3
read more:

Two Pickup Tools 9.99
RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.
read more:

Volvo Saab Diagnostic Unit 0.00

PC based program. Runs with Windows 98/ME/2000/NT or XP. Available functions/Fault code read out/Erase fault codes/Real time data/ system information/SRI reset. Service information. Function chains evaluation. Engine management, fuel injection, ignition control. Anti lock break system. Safety restraint system, airbag. Electronic climate control, A/C. Immobilizer, keyless entry, anti theft system. Instrumentation, instrument cluster, combined instrument. Transmission, gearbox, all wheel drive. Free full time technical support. Workshop Community data link connection. Download data direct to on board ECM. (July 2004 availability, estimate) Volvo currently priced at only $3,195.00, include Saab for additional $995. 00, with yearly updates for $595.00.
This system is one of the best values offered to the independent shop owner today.

Klein Tool Pouch 46.95
Klein Tool Pouch
Leather, 8 Pockets, Thong, Snap, Tunnel Loop
Leather construction. Provides space for an large number of tools. Riveted to assure long life.
Klein Tools product line includes virtually every major type of hand tool used in construction, electronics, mining, and general industry in addition to the electrical and telecommunications fields.Klein Tools also supplies a line of occupational protective equipment. Klein remains dedicated to supplying only the finest quality products.Made for professional users, Klein tools are available through stocking distributors worldwide.
read more:

Set 4 Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Set of Two Terminal Tools 29.50

Special Electrical Tools Terminal Tools Set of 2
Special Electrical Tool Terminal Tool Eliminate Damaged wires and Terminals. Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals.

Set 3 Porsche Clutch Tools 13.99

Set of 3
Porsche Clutch Alignment Tools
Covers a BIG variety of Porsche Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Saab Puller / Press 118.50

For proper extraction of waterpump 99 , 900
Use with tool SA 015

Set 3 BMW Clutch Tools 13.99

Set of 3
BMW Clutch Alignment Tools
Covers a BIG variety of BMW Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Two Pickup Tools 5.50

RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.

More Tools 0.00

Be sure to look in the VOLKSWAGEN section for more tools. Plus you will find some sweet deals in the ZDMAK SPECIALS section, and in the TODAYS SPECIALS section. If you need something quickly please email or call. Expedited or Air shipments should be called in as early in the day as possible. I will do all I can to get you the tools you need or help you with your tool search.

Fuel Wrench 75.00

SAAB FUEL LEVEL SENSOR TOOL 83 93 365

Set 3 Audi Clutch Tools 13.99

Set of 3
Audi Clutch Alignment Tools
Covers a BIG variety of Audi (and many Volkswagen Applications).
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Set 7 Marking and Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Saab Oil Seal Arbor 114.00

For proper installation of oil seal flywheel side of crankshaft 2.0L 1973 and newer.

Set of 6 Exhaust Tools 00
Item5965VA8DescriptionAssortment of 6 exhaust system tools
read more:

Flywheel Locking Tool 49.50

Flywheel Lock Number 83 92 987
Saab 99, 900, 9000 for locking the engine when removed.

Long Pattern Hex Set 4 13.50

4 Pc Long Allen Hex Set
Sizes include: 6, 7, 8, and 10mm Hex.
This set works well on several vehicles such as Audi, AMC, BMW,
Honda, Jaguar, Jeep, Saab, Volkswagen and Volvo.
3/8 Drive set of 4

Shortie * Drain Plugs 3/8 Drive Tools 0.00

Serious Stubby Short Pattern 3/8 drive Hex Allen Drain Plug Sockets. Very Hard to find in this short version in a 3/8 drive. These tools will work well in a tight spot.
The larger 1/2 drive tools are too big for some applications.
Sizes available 17mm, 14mm, 13mm, 12mm, 10mm and 8mm.
Sold each or in a set of 6.

M8, M10 and M12 Triple Square Set 3 39.99

Super Set!
Three Headbolt Tools Triple Square 12 Point (XZN) Sockets M8, M10 and M12
Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.
Excellent for working on German vehicles.
Each tool is 5 1/2 inches overall and the shaft is 4 inches long!
Zdmak Special Set of 3 big 1/2 drive Tools!

Extractor Tool Kabelex 00

Ejection extractor tools for contacts MAN/Volvo, DaimlerChrysler, BMW, Porsche, Volkswagen, Audi: tools for flat plug in sockets with asymmetrically positioned latches in terminals with single release, with two release channels,etc..
ClickHere for More Kabelex information. Extractor tools for soldered contacts, for Micro Timer I, cable extractor tools for Micro Timer II, III, Pit Pod contacts, Maxi Power Timer , SLK contactsetc...

Ferrari Tools 00

If you would like a current sales flier on Beta Products and Tools please email with your complete mailing address and literature will be sent to you directly.
email: sales@zdmak.com

MoreBeta Ferrari Tools Here

Roll Up Pouch 6.99
Roll Up Pouch Only
DOES NOT INCLUDE TOOLS
PICTURE IS FOR REFERENCE ONLY
12 pocket pouch holds a variety of tools.
Great for auto and motorcycle use.
Made of heavy duty nylon fabric for long life.
Long web strap with velcro fastener keeps pouch closed tightly when not in use.
read more:

Cats Paw Capped Screwdrivers 43.50
6 Pc. Cats Paw Capped Screwdriver Set
Capped so you can strike with a hammer.
Phillips 1, 2, 3, Slotted 7/32", 1/4", 5/16"Blade extends throughout handle and is fully heat treatedTwo composite handle designed for user comfort and reduced hand fatigueCapped end Handle allows the user to strike the screwdriver without damaging the handleHex bolster for extra turning power.
Mayhew Tools has been manufacturing Punches and Chisels in the Western Massachusetts town of Shelburne Falls since 1856. As the oldest Punch and Chisel manufacturer in the U.S., Mayhew Tools has grown from a small tool house to the leader of the industry. Their product line has also grown to include an assortment of Wrecking and Prying Bars, Masonry Tools, Handguarded Tools, Screwdriver Type Pry Bars, Brass Punches, Pilot Punches, All Steel Wood Chisels, Nail Sets, Carbon Scrapers and Hollow Punches.
read more:

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Dogleg and 8mm Hex Set 29.50

Hex Tools (2) Dogleg Plus Regular 8mm Allen
Set of Two Tools Sturdy 1/2 Drive Dogleg (offset) 8mm Allen SocketApplicable: M116, 117
Overall length of the tool is 4 1/4 inches.
Tool used for R&R of cylinder head bolts.
Similar to Mercedes number 000 589 3407 00.
Plus 8mm (straight) standard Hex 1/2 drive.
Excellent tools for working on Mercedes and other German vehicles.

Junior Tool Bag 27.99
Bucket Boss Brand GateMouth Jr. Tool Bags

Ideal for cordless power tools and accessories

Super wide "gate mouth" design

Size: 13" x 9" x 8"Product Description
From the Manufacturer
Just the right size for power tools. This bag is engineeredto do what the plastic or metal case provided with small power toolscant carry a cordless tool, battery charger, spare battery and a complete setof hand tools and accessories specific to the job. Foam padded sides and bottomprotect walls from dings, floors and counters from scratches. Interior andexterior tool pockets of various sizes will fit most tool combinations. RickDuckwear color scheme. A better way to carry small power tools, it also makes afine general tool bag. 6 exterior, 17 interior pockets. 13 in. L x 9 in. W x 8in. H.
read more:

Finding the Right Workshop Tool Just Got Easier
Every workshop operates under pressure. Having the right tools to tackle both routine and out of the ordinary jobs is key to safe and efficient working and keeping customers happy. Responding to this, Damar International Ltd, UK distributors for Hazet precision automotive tools from Germany, have put the entire 192 page catalogue on line at www.damar.biz and backed this up with expert phone support. (PRWEB Jul 16, 2006)
read more:

Headbolt Tool Set 2 29.50

These are the tools you are looking for!
Plus they are on sale!
Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Audi VW Headbolt Tool Set 2 29.50

These are the tools you are looking for!VW AUDI Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Idle Pulley Tensioner 11.95

Saab Repair Tool
Tension Holder
For keeping the idle pulley tensioner compressed
when replacing serpentine belt.
Engine 2.3L with 16 valves 1993 and newer.
Picture is for reference only.

Set of 7 Suspension Tools 00
Item5965VA2DescriptionAssortment of 7 suspension tools
read more:

911 Oil Service Tool 38.00

Porsche 911 Tool.
Hazet Oil Filter Wrench size 92mm.
With square drive nominal size 12.5 = 1/2 inch.
outside hexagon 27 mm.
15 point (inside flats or flutes)
For 911 and several other vehicles such as Saab 900, 9000 and 99 etc...
High Quality Tool Made in Germany.

Cotton Wrench Roll Up 22.50

Tool Roll Wrench Roll Up Fits 3/8" to 1 1/4" or 6mm to 32mm wrenches Brass grommets to hang in shop Rolls up and ties for easy transport. Constructed from cordura and heavy duty nylon, the Wrench Roll features 14 pockets of different widths and depths to hold various hand tools like wrenches, ratchets, and extensions, and protect them against impact damage and clanging. When rolled closed, the Wrench Roll is secured with two ties that permit the user to make his Wrench Roll as small or large as his tools will allow. Can be stored inside larger tool bags or boxes. A very useful organization and storage pouch for your tools. This wrench roll up is designed specifically for wrenches, ratchets, ratchet extensions, and other relatively long and thin tools. Tools like pliers will not fit. This item is 27" wide side to side, 10" tall at the left, and 22" tall at the right. The smallest pocket on the left is 3" deep, and the largest pocket on the right is 14" deep.

Terminal Tool Wire Remover 13.99
Special Electrical Tools Terminal Tool Eliminate Damaged wires and Terminals.
Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals. See set of 2 below.
read more:

Canvas Tool Bag 22.25
Canvas Tool Bag
Features & Benefits:
Big enough to hold and keep all your necessary tools.
Internal metal frame holds bag wide open.
10 Outside pockets to organizes tools.
14 Inside pockets for accessories.
Built of rugged 20oz. canvas material with hard bottom for better stability.
12 inch Long x 10 inch Wide x 11 inch Height
read more:

RETAINER TOOLS 79.00

FACTORY TOOLS USED WITH ENGINE SUPPORT 10 222 WHEN REMOVING AND INSTALLING THE GEARBOX ON 16 VALVE ENGINES.

Super Tools for BMW 29.95

You will receive 4 all four tools with this set.
Included are 3 flex shaft (female) nut drivers 6, 7, and 8mm
Plus a very handy 1/4 inch (male) Driver.

Set of 10 Spark Plug Tools 00
Item5965VA7DescriptionAssortment of 10 spark plug tools
read more:

Set of 6 Steering / Transmission Tools 00
Item5965VA1DescriptionAssortment of 11 steering and transmission tools
read more:

PRESS TOOLS 139.99

PRESS TOOLS USED FOR INSTALLATION OF THE BALL BEARING FOR DRIVE SHAFT ON MANUAL TRANSMISSIONS 012 AND 01A

Motorcycle Roll Up (Large) 33.99
Tool Roll Up
Great for Bikes or cars.
(Motorcycle people especially like this roll up).
Made of 1000 denier, urethane coated cordura to help keep your tools dry, organized and protected. Extra long nylon straps with sleek, quick release buckles keep everything wrapped up tight (a 2 1/2' diameter when empty). Heavy duty elastic retainer to help keep your tools in their place. Three large Velcro sealed pouches in the cover flap have easy open pull tabs for access to shop rags, jumper cables or sockets. This organizer is designed for use inside a tool pouch or saddle bag. Three sizes to choose from. Large is 13" wide and will fit most 12" crescent wrenches. Medium is 11" wide and will fit in most wide glide tool pouches. Small is 9" wide and will fit in most narrow glide pouches. Available in black, tools not included.

Please note: This is size LARGE.
read more:

You Searched for

saab tools

Trade Links With ZDMAK