vw timing tools FIND vw timing tools audi timing tools -- mmk4mkt

Dial Indicator and Holder 98.50

Bosch Diesel Injection Pump
Timing Indicator Tools.
With High Quality Dial Indicator Made in Germany!
You will not find this price anywhere except Zdmak!
Tools are used for the accurate setting of
the Bosch diesel fuel injection pump timing.
The Holder screws into the back of the injection pump,
giving a dial indicator reading necessary for setting
the correct pump timing.
This set comes complete with the correct tools for the job!
Contents: Metric Dial Indicator Made in Germany,
plus holder plus the 10cm dial indicator extension pin,
making the timing easy to set,
as the timing has a range from 0.83mm to 1.15mm.
For use on VW and Audi diesels.
Also works with 1981 1986 Volvo 6 cyl 2.4L diesels,
1989 1994 Dodge 6 cyl 5.9L diesels.

FYI FOR PEOPLE WHO DECIDE "NOT" TO USE THIS SET
Here is some helpful info...Universal conversion factor for milimeters into decimal inches is .03937
EXAMPLE: 13mm X .03937= .5118"

Timing Chain Tools 64.99

BMW37
For changing timing chain on BMW 4 and 6 cylinder models.

2 Pins and 2 Plates 103.00

2 Pins and 2 Plates Set of four tools.VW Audi T.D.I. and New Beetle Cam Kit Reference numbers for the two tools on the left are: 3418 and 3359. Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998 and newer VW models equipped with a T.D.I. engine. This two piece lock plate and alignment pin allows the technician for factory correct and trouble free installations.

Tools on the right side of image are Diesel Lock Plate / Cam Setting Bar Same as Volkswagen ref 2065a Tool used for securing the cam shaft from rotating and maintaining correct timing position engine AAZ during R&R of cam shaft drive belt. Applicable: VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 Lock Pin for Diesel (Same as VW tool 2064). Tool used for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Volkswagen Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 All 4 tools are High Quality Made in Europe!

Dial Indicator Holder 37.50

Indicator Holder
This is the tool you need if you have been searching for a holder that will accomodate your indicator ONLY IF YOUR INDICATOR HAS A SHANK SIZE OF 3/8
MOST OF THE OTHER HOLDERS ON THE MARKET ARE FOR 8MM SHANK.
THIS IS FOR 3/8
IF YOU SEE A COPY OR A CHEAP IMITATION OF THIS ITEM WITH THESE DIMENSIONS YOU CAN BE SURE IT IS NOT A QUALITY TOOL!
This is a Quality Holder you will not find a tool (with these dimensions) at a better price anywhere!
Used for the accurate setting of the Bosch diesel fuel injection pump timing.
The Holder screws into the back of the injection pump,
giving a dial indicator reading necessary for setting
the correct pump timing.
This tool will help you complete your set having the correct tools for the job is important to any serious mechanic!
Included with the Holder is the 10cm Dial Indicator Extension Pin,
making the timing easy to set,
as the timing has a range from 0.83mm to 1.15mm.

Timing Kit Master Set 1 254.00

Serious Master Set: Description (for upper 3 tools) Timing belt on engine ALH. Chassis 1999 1/2 thru 2003 Golf Jetta (A4) MKIV and New Beetle TDI thru 2003.Reference numbers for the three tools are 3418 (Left side of image above) 3359 (Pin Center) and T10020 (Wrench Right. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine.

BELOW IS THE DESCRIPTION ON THE LOWER 5 TOOLS. Five tools: vw 3032, 2066, 2065A, 2064 and 12717 (Pin Wrench) Details: 3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: VW / Audi diesels : 2066 Used for accurate adjustment of Bosch diesel injection pump. 2065A Diesel Camshaft Locking Plate Tool 2064 Lock Pin for Diesel. Pin Wrench 121717 Made in Germany for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of idler pulley and rotates around the off center retaining bolt allowing for belt tension adjustment (Tension Pulleys) 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80. You will get all 8 tools shown here.

Set 3 BMW Tools 125.00

Set 3Repair Tools for BMW
Alignment Jig Number 113240
Pin Number Number 112300
Tensioner Number 113390

Used for setting cam shaft timing.
Kit includes (2) blocks (1) swivel lock and (1) locator pin.
Applicable: BMW engine M42, M44, M50, M52, M52TU.
The ref number for the Jig ( 2 blocks) 113240
and the Pin is 112300RigidChain Tensioner 113390 Ref: BMW Tool 90 88 6 113 390
Tool is used for tensioning primary chain when adjusting valve timing.
Late model V8 Applicable: M50, M60, M62

Winner gets all tools pictured.

Timing & Cam Tools 0.00

Please note: There are three main Cam bars for timing.
Choose from 3391
3243
and T40005 (the T40005 is for V 8)
Notice the tool number 3242, this is the T.D.C TOP DEAD CENTER Pin. This pin goes with 3391 or 3243. Type your selection in the search or you can find the tools in this section. You should refer to a manual if one is available to you, or feel free to call me or email. I will try to assist you. Please note:
In order to make your selection you must determine if your vehicle is 2 valve per cylinder or 5 valve per cylinder or V8. Example = Notice tool number 3391 says it is for 5 valve. The 3243 is for 2 valve per cylinder.

Timing Tools (2) 88.50

New Beetle and T.D.I. Cam Kit Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps.This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine.This two piece lock plate and alignment pin allows the technician for factory correctand trouble free installations Reference: 3418 and 3359.

Locking Pin and Plate 26.00
Set of two tools including:2065A Diesel Cam Shaft Locking PlateThis locking Plate (above) is the same as vw tool 2065a Used for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS:2064 Lock Pin for Diesel This Locking Pin is used forsecuring Bosch diesel injection pump sprocket from rotatingduring R&R of cam shaft drive belt.This Pin also assists in locating the general timing position of pump.Applicable: All VW/Audi diesel engines.
read more:

Engine Turning Bar Double Row Timing Chains 55.50

Engine Turning Bar used for adjusting valves and timing.Applicable: BMW with dual timing chains.

Engine Turning Bar Single Row Timing Chain 92.50

Engine Turning Bar used for adjusting valves and timing.Applicable: BMW and 6 cyl engines with a single timing chain

Spanish Timing Manual 49.00
Description:
2002 Spanish Version
Timing Belt Manual
read more:

Timing Belt Tensioner 44.95

Volvo Timing Belt Tensioner Tool with 6mm Hex Adjuster.On the 1998 and later Volvo engines the timing belt tensioner is located down near the bottom of the engine in a hard to reach area. This uniquely designed tool reaches down and rotates the 6mm hex adjuster on the timing belt tensioner so that one technician can easily set the correct tension preload and tighten the lockdown bolt. This unique tool works on all engines 98 and later with the 6mm allen adjuster and includes: 4 Cylinder, 1.9L, 5 Cylinder, 2.3L, 2.4L, 2.5L, 6 Cylinder, 2.8L, 2.9L

Audi Info and Timing 0.00

There are three main Cam bars for timing.
3391, 3243 and T40005
(T40005 is for V 8)
Notice the tool number 3242 this is the T.D.C (TOP DEAD CENTER) Pin
This pin goes with 3391 or 3243.
Type your selection in the search or you can find the tools in this Audi section.
Feel free to call me or email. I will try to assist you.
Please note:
In order to make your selection you must determine if your vehicle is 2 valve per cylinder or 5 valve per cylinder or V8. Example = Notice tool number 3391 says it is for 5 valve. The 3243 is for 2 valve per cylinder.

Locking Pin and Plate 26.50

Set of two tools including:2065A Diesel Cam Shaft Locking PlateThis locking Plate (above) is the same as vw tool 2065a Used for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS:2064 Lock Pin for Diesel This Locking Pin is used forsecuring Bosch diesel injection pump sprocket from rotatingduring R&R of cam shaft drive belt.This Pin also assists in locating the general timing position of pump.Applicable: All VW/Audi diesel engines.

TDI Cam Kit 2 Tools 88.50
T.D.I.
New Beetle Cam Kit
Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps.This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine.This two piece lock plate and alignment pin allows the technician for factory correctand trouble free installations.
Reference: VW numbers 3418 and 3359.
read more:

Cam Spoke Lock Device 85.00
Twin and Quad Cam Spoke Lock Device
Universal Twin Cam Number 2727Used for securing Twin Cam Pulleys.
Applicable: All twin or quad cam engines with timing belt pulley sprocket on each cam.Used for the crucial task of securing twin cam pulleys from rotating during the R&R of timing belt. Fully adjustable, this tool comes complete with 1 pair 8" and 1 pair 4.5" long, Left/Right hand threaded rods.The shorter needed for confined spaces where the rods might interferewith the fire wall or other auto part. Fully constricted onto the spokesof the cam pulleys and locking down the securing wing nuts,reveals a 6 point locking mechanism.This tool will remain rigid, not allowing for any movement of cams, saving your timing.Please note:With Quad cam pulley engines 2 sets of tool 2727 are needed to complete the task.All Twin or Quad cam equipped with a timing belt pulley sprocket on each cam.
read more:

Cam Bar for 5 Valve 129.50

Camshaft Timing Tool Securing Bar
TOOL REF 3391
Cam Securing Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 (2002 4 cam)
Please note: 3391 for 5 valves per cylinder.

Set 2 Power Lifter Pickup Tools 38.00
Set of 2 * Pick up Tools
One 19 inch long with lift cap 1.5lbs.
One 2 feet long with 3 lbs. capacity.

Please note: picture is for reference only.

Tools are also sold separately below.

read more:

Camshaft Locating Fixtures 150.00

Timing tools sold as a set (2) pieces.
Camshaft positioners, number 3341 especially for Audi A8.

Porsche Repair Sockets (2) 108.50

Set of TWO tools including P203 and P202 Socket: Used to secure the cam shaft from rotatingduring R&R of cam shaft nut, to be used in conjunction with P203 above.Crucial when adjusting valves or setting cam timing. 911 (65 80)

V8 Camshaft Securing Bar 135.00

V8 Timing Tool T40005
Camshaft Securing Bar Audi A6 / A8
Used for the crucial taskof securing both engine banks, cam shafts at T.D.Cwhen replacing the timing belt.

TDC Pin T40026 24.99

Threaded Pin or Lock Bolt Tool used to secure crankshaft at T.D.C. during R&R of toothed timing belt, flywheel, drive plate, and crank bolt. Lock Bolt should be used in conjunction with Cam tools T40005.Check you manuals for details.

Cam Spoke Lock Device 79.00

Twin and Quad Cam Spoke Lock Device
Universal Twin Cam Number 2727Used for securing Twin Cam Pulleys.
Applicable: All twin or quad cam engines with timing belt pulley sprocket on each cam.Used for the crucial task of securing twin cam pulleys from rotating during the R&R of timing belt. Fully adjustable, this tool comes complete with 1 pair 8" and 1 pair 4.5" long, Left/Right hand threaded rods.The shorter needed for confined spaces where the rods might interferewith the fire wall or other auto part. Fully constricted onto the spokesof the cam pulleys and locking down the securing wing nuts,reveals a 6 point locking mechanism.This tool will remain rigid, not allowing for any movement of cams, saving your timing.Please note:With Quad cam pulley engines 2 sets of tool 2727 are needed to complete the task.All Twin or Quad cam equipped with a timing belt pulley sprocket on each cam.

Insulated Driver Set Made in Germany 48.50
Professional Quality Insulated Tool Set.Individually Tested Tools Certified To 1000 Volts.Tools Meet The Following Safety Specifications:ASTM F 1505 01 IEC 900 VDE 0682/Part 201 ISO 9001Certified Tools Meet OSHA Definition For Insulated Tool Requirements.Quality Tools Made In GermanyCVM Tool Steel Hardened To Average 58/60RC. 10 Piece Insulated Screwdrivers
Set Includes:Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 6.5 Phillips: 0, 1, 2, 3
read more:

Bar and Pin for 5 Valve 139.50

Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6Please note: 3391 for 5 valves per cylinder.

BMW Repair Tool 125.00

116180 FixtureAppl:M52, M52TU, M54 Details:Place chain wheels in special tool 116 180, position tooth gap in inlet chain wheel and feed on chain. For timing of the double Vanos cam adjustment for 1998 and later 6 cylinder BMW. Use it together with tools BMW113 240, BMW113290, BMW112300, BMW114220, BMW116150

911 Tool Set 118.00

Set of 4 Tools for 911.
You get the TWO SOCKETS P202 and P203 ABOVE and the FEELER GUAGE SET
The Socket set is used to secure the cam shaft from rotating during R&R of cam shaft nut. Crucial when adjusting valves or setting cam timing. 911.

This Feeler Guage set includes P213 Holder with blade and Blade Pack of 5 extra Blades size .004

Two Pickup Tools 9.99
RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.
read more:

CAMSHAFT ALIGNMENT KIT 119.95

CAMSHAFT ALIGNMENT KITBMW3035 Aligns and holds camshaft in place when assembling timing chain.Includes: Blocks and locking pin.This is a set (3) of three tools for the alignment and securing of camshafts.Applicable: M40, M43, M70, M73 BMWFor V 12 engines you must have 2 blocks and the locking pin for this procedure.KIT REF: 113190 (PIN REF: 112300)

Vanos Master Set (5) 299.50

Special Tools needed for assembly and proper timing the Vanos unit found on 1998 & newer 6 cyl engines. Especially for BMW 6 cylinder engine: M52TU (1998 2000), M54 (2001 2004), & M56 (2003 to present). Set includes: Number 116150 Alignment Jig, 116180 Sprocket (Jig) Assembly, 114220 Chain Tensioner and 113292 Lock Pin.

Double & Single Row Set up Complete 270.00

Master Link Timing Chain Tool
Single Row and Double Row Set up.
Used for proper assembly of timing chain master link.
OM601, OM602, OM603, OM615, OM616, OM617
(also M102, M103 AND M116)
You will get all (3) bits for double and single row.
Picture above is for reference only.

Chain Tensioner and Bracket 74.50

Set of 2 Tools
Rigid Chain TensionerBMW114230 plus 112400 Bracket.
Tensioner is Ref: BMW Tool 90 88 6 114 230
Tool is used for tensioning primary chain when adjusting valve timing.
Late model V8 Applicable: M50, M60,M62.
Bracket is number 112400 used for screwing in tensioner with case cover removed.

Crank Stopper 17.99

Crank Stopper The Crank Stopper Helps to lock an engine in place for timing chain/belt and pulley removal. As easy as replacing a spark plug! Aids in the removal of harmonic balance pulleys. Helps in installing timing chains & belts. No more trying to hold flywheel teeth. Brass end protects piston from damage. 14mm thread

Cam Kit 2 Tools 88.50

Cam and Vanos Set 4 135.00

Set of four tools includeg Cam set Ref: 113240 used for proper alignment and securing of BMW cam shaft while assembling timing chain.
Plus T.D.C. Pin Ref: 112 300 (Locking Pin). Applicable: BMW Model M42, M44, M50, M52, M52TU
Plus Vanos Sprocket Turning Tool Ref: 90 88 6 115 490 For turning sprockets when removing and installing VANOS unit some applications include: BMW Engine M50, M52, M50 US, M52 US
Plus Banjo Fitting Compressed air connection (fitting) for checking VANOS adjustment unit.Applicable: M50, M52, M54 You will get all four items with this purchase.

Klein Tool Pouch 46.95
Klein Tool Pouch
Leather, 8 Pockets, Thong, Snap, Tunnel Loop
Leather construction. Provides space for an large number of tools. Riveted to assure long life.
Klein Tools product line includes virtually every major type of hand tool used in construction, electronics, mining, and general industry in addition to the electrical and telecommunications fields.Klein Tools also supplies a line of occupational protective equipment. Klein remains dedicated to supplying only the finest quality products.Made for professional users, Klein tools are available through stocking distributors worldwide.
read more:

TDC and Crank Stopper 69.99

TDC Tools and Crank Stopper The TDC Indicator enables atechnician to accurately setthe piston to Top Dead Center.Just remove the spark plug, screwin the gauge and rotate the engine,observing the gradation markson the sliding shaft. Note the topof the piston stroke! The Crank Stopper Helps to lock an engine in place for timing chain/belt and pulley removal. Call or email for complete set or singles.

Pin T.D.I. Only 22.99
Pin only Number 3359 for Diesel timing of Bosch injection pumps 1998 and newer VW models equipped with a T.D.I. engine.
read more:

Set 4 Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Set of Two Terminal Tools 29.50

Special Electrical Tools Terminal Tools Set of 2
Special Electrical Tool Terminal Tool Eliminate Damaged wires and Terminals. Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals.

Saab Set 3 Clutch Tools 13.99

Set of 3 Clutch Alignment Tools Covers a wide variety of Saab Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Set 3 Porsche Clutch Tools 13.99

Set of 3
Porsche Clutch Alignment Tools
Covers a BIG variety of Porsche Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Set 3 BMW Clutch Tools 13.99

Set of 3
BMW Clutch Alignment Tools
Covers a BIG variety of BMW Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Two Pickup Tools 5.50

RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.

More Tools 0.00

Be sure to look in the VOLKSWAGEN section for more tools. Plus you will find some sweet deals in the ZDMAK SPECIALS section, and in the TODAYS SPECIALS section. If you need something quickly please email or call. Expedited or Air shipments should be called in as early in the day as possible. I will do all I can to get you the tools you need or help you with your tool search.

Pin Wrench Set 2 49.00

This is the Best Quality Set of the two CRUCIAL VW Audi Pin Wrenches you will find anywhere.
SUPER HIGH QUALITY TOOLS (BOTH) MADE IN GERMANY BY HAZET.
First item is number V159 (this is a smaller tool on the left side picture is not to scale) This tool is for easy adjustment of Camshaft spur belts
(toothed belt) on idler pulleys with Pin holes. This wrench with its protruding pins, grabs the center
of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment.
Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80
Distance of pins 18 mm, diameter of pins 2.9 mm for deep located idler pulley
on toothed belt on 1,6 l diesel engine VW van T3 (up to model 1991).
V159 is the correct number the old VW Number on this (smaller) tool was 2587.

T10020 Special wrench with an offset (angled) head (Larger tool on right side of image)
This tool also used for adjusting timing belt tension.
99 and later VW Golf, VW Jetta and Beetle with 2.0 Litre Gas and 1.9 Litre TDI Engines.1999 and newer Golf, Jetta
New Beetle with 2.0l gas engine and 1.9l T.D.I. Diesel engine. You will get both tools with this purchase.

Set 3 Audi Clutch Tools 13.99

Set of 3
Audi Clutch Alignment Tools
Covers a BIG variety of Audi (and many Volkswagen Applications).
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Set 7 Marking and Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Cam Bar for 2 Valve 129.50

Camshaft Securing Bar Timing Tool
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4 94 97 AFC Engine
Please note: 3243 Securing Bar for2 valves per cylinder.

You Searched for

vw timing tools

Trade Links With ZDMAK