xzn bit FIND xzn bit xzn socket -- mmk4mkt

27mm Special Socket 82.98

27mm Special Tool Made in Germany
12 Point Open Socket (1/2 Drive size) Tool used for injection nozzles on BMW Diesel
E30=324TD
E28=524TD
E34=524TD
M51=E36=325TD
E34=525TDS
This Tool is very hard to find and the German Hazet quality cant bebeat. You can find all the other sizes but a 27mm is very difficult to locatewhen you are in a pinch. Ref BMW 135320

7mm Super Stubby Hex 3/8 Drive 25.00

3/8 Drive Hex ''STUBBY'' 7mm
All the BMW People are after this tool.
Tool is exactly 1 inch long.
Hard to find and even harder to find at a good price.
Super Stubby 7mm Hex Socket for brake work on BMWs.
Drive size is 3/8.
(This tool is also available in a less expensive 1/4 drive
type in the number HEX7MM in the search button)
However most BMW people want this size (3/8).

Triple Square Wrenches XZN 00

Hard to Find *

Item98XZN
Description:Offset key wrenches with XZN (triple sqaure)12 point profile, nickel plated.Specifications

read more:

Metric Screw Gage 14.99
Trying to get the hang of Metric screw threads?
Now it's easy to find the screw you need.
Made in the USA of satin chrome plated steel for long life.
Metric sizes M2 M7.
(Picture is for reference only).
read more:

Machine Screw Gage 14.99
Machine Screw Gage
...Trying to get the hang of screw threads?
Now it's easy to find the screw you need.
Made in the USA of satin chrome plated steel for long life.
(Picture is for reference only).
This gage covers the range of machine screws and bolts from the US equivalent of a 1 up to 1/4''.
read more:

8 Piece XZN Set 24.99
Here is a set you may nothave seen before,especially this quality and for this price!
STUBBY XZN TRIPLE SQUARE8 PIECE SOCKET SET
Socket Set 3/8 DriveSizes included:
4mm, 5, 6, 8, 10, 12, 14 and 16mm
Comes with the plastic carrying case.
Sturdy compact One Piece design...SWEET.
Satin Chrome with black impact tips.
Super ''New'' S2 Alloy Steel. Fully Heat Treated
The large 16mm socket alone is hard to find for less than 12 dollars.
read more:

Pocket Volt Tick 14.99
Voltage Indicator.
Senses presence of AC voltage without contact Use to detect voltage in outlets, lighting fixtures, circuit breakers, wires and cables, or to find a break in a wire Safe, non contact voltage detection Bright LED and audible alarm sound if voltage is present Voltage Detection: AC V 50 1000 Frequency: 50 500Hz Measurement Category: Cat IV, 600V per IEC 61010 1; Cat III, 1000V per UL 3111 1
read more:

Triple Square Set 24.99
Triple Square Set 8 Piece.
Here is a set you may nothave seen before,especially this quality and for this price!
STUBBY XZN TRIPLE SQUARE8 PIECE SOCKET SET
Socket Set 3/8 DriveSizes included:
4mm, 5, 6, 8, 10, 12, 14 and 16mm
Comes with the plastic carrying case.
Sturdy compact One Piece design...SWEET.
Satin Chrome with black impact tips.
Super ''New'' S2 Alloy Steel. Fully Heat Treated
The large 16mm socket alone is hard to find for less than 12 dollars.
read more:

Spoiler Spanner 18.50

Hard to find Spoiler Spanner Wrench996 PIN WRENCH Spanner 911 Turbo Spoiler. Quality tool Made in Europe.

Big 30 Inch Extension 39.75
Extra Long 30 inch Impact
Universal Extension Bar
3/8 Dr. male end (spring loaded) universal end, 1/2 inch female Drive heavy bar to reduce torque flexing. A GREAT tool for transmission work etc.
Durable, spring loaded impact universal joints featuring the new safety ring to prevent any movement of the pin during the impacting process. Extraordinary value for the money. Most extensions you will find do not have a U joint or do not come in this extra long size with a 3/8 end. Extremely handy for the european auto mechanic.
read more:

Folding Tamperproof Bit Set 8.99

This is a Folding Set with Tamperproof Torx heads.Very hard to find this item in a tamperprooof style.(Each torx blade has a hole in the tip picture does not show the tips sorry)The Torx sizes are: T9, T10, T15, T20, T25, T27, T30, T40.
This is a handy item for BMW people.

More Tools 0.00

Be sure to look in the VOLKSWAGEN section for more tools. Plus you will find some sweet deals in the ZDMAK SPECIALS section, and in the TODAYS SPECIALS section. If you need something quickly please email or call. Expedited or Air shipments should be called in as early in the day as possible. I will do all I can to get you the tools you need or help you with your tool search.

Long T30 Torx 14.99

4 inch Long Torx T30 SocketHard to find Torx socket (long pattern). This tool is 3/8 inch drive.Some applications include tightening or loosening airbag unit also for work on steering wheel. Picture is for reference only.

14mm Super Stubby Hex 16.99

14mm Super Stubby Hex
This is the tool all the BMW people are looking for.
3/8'' DriveSHORT PATTERN 14MM SOCKETDesigned for R&R of gearbox drain plugs.READ: THIS TOOL IS JUST UNDER 1 1/4 INCH LONGVERY HARD TO FIND IN THIS LENGTH AND SIZE.Also for a variety of OTHER applications.

Tamperproof Torx Extra Long 34.50

Look at it!
Set of Six Extra Long Torx Drivers Tamperproof!
Over all length of 16'' for hard to reach areas.
Made of S 2 steel for extra strength.
Set includes: T 10, T 15,T 20, T 25, T 27,T 30. Very rare and hard to find especially for this price!

M Logo Stem Caps 16.99

M LOGO BMW Valve Stem Caps
Set of 4. Original BMW factory items. They are machined brass, not plastic like the counterfeit valve stem caps you find elsewhere. Genuine chrome finish. Each cap has a rubber O ring to insure you will not lose tire pressure.

Roundel Stem Caps 16.99

Original Roundel BMW Valve Stem Caps
Set of 4. Original BMW factory items. They are machined brass, not plastic like the counterfeit valve stem caps you find elsewhere. Genuine chrome finish. Each cap has a rubber O ring to insure you will not lose tire pressure.

Universal Scraper Set 13.95

Universal Cushioned Grip Razor Edged Scraper and Blades Set
Comes with 10 replacement blades!Ideal for Auto Glass & Gasket scrapingRemoves sealing materials, glue residue, tape, labels.This tool has one of the most comfortable Handles you will find.Excellent for the professional or shadetree mechanic.
Universal Scraper Made in Germany!

Shortie * Drain Plugs 3/8 Drive Tools 0.00

Serious Stubby Short Pattern 3/8 drive Hex Allen Drain Plug Sockets. Very Hard to find in this short version in a 3/8 drive. These tools will work well in a tight spot.
The larger 1/2 drive tools are too big for some applications.
Sizes available 17mm, 14mm, 13mm, 12mm, 10mm and 8mm.
Sold each or in a set of 6.

Extra Long Pliers 24.50

''Extra Long'' Valve Stem Seal Pliers
You will not see these every day, or find a better price on this tool anywhere!These are longer than the standard Valve Pliers.Tool is usedfor the proper extraction of hard to get at stem seals.The inside grooves on the tips of this Plier allows the firm grip of both O.E. and aftermarket sealsApplicable: Overhead Cam engines.

Mini BMW Beer Steins Set 27.99

This is a pair of miniature Beer Steins 3 inch tall with the BMW motorcar logo on each lid. They are also marked inside each lid '' ZINN BLEIFREI''. Both steins are in great condition. A very nice addition to any BMW collection or as a gift for the serious BMW fanatic. Very rare and hard to find especially in this condition and in a pair like this. These items will be shipped in bubble wrap for protection and will NOT be damaged upon delivery.

8 Piece XZN Set 29.50

Here is a set you may nothave seen before,especially this quality and for this price!
STUBBY XZN TRIPLE SQUARE8 PIECE SOCKET SET
Socket Set 3/8 DriveSizes included:
4mm, 5, 6, 8, 10, 12, 14 and 16mm
Comes with the plastic carrying case.
Sturdy compact One Piece design...SWEET.
Satin Chrome with black impact tips.
Super ''New'' S2 Alloy Steel. Fully Heat Treated
The large 16mm socket alone is hard to find for less than 12 dollars.

Two Stubby Sockets 23.99

Two Special Short Pattern Sockets
One of each 7 and 14mm.
Details: The 7mm socket is 1/4 inch drive and the 14mm socket is 3/8 drive.
The 14mm is designed for R&R of gearbox drain plugs.
PLEASE READ: THE 14MM TOOL IS JUST UNDER 1 1/4 INCH LONGVERY HARD TO FIND IN THIS LENGTH AND SIZE.
THE 7MM TOOL IS FOR BRAKE WORK AND IS ONLY 1 INCH LONG.
YOU JUST HIT THE JACKPOT.

Extra Long Boot Plier 29.99

Extra Long Spark Plug Wire PliersRare and hard to find at this price.Used to remove the newer high voltage type wiresWide grip section and special extra long pattern makes it easy to remove wires without separating crimps. Applicable: 102, 103, 104, 110, 115, 116, 117, 119, 120Similar to Mercedes Tool Number 104 0037 except this tool is much longer.

Triple Square (XZN) Set 29.50

Here is a set you may nothave seen before,
especially this quality and for this price!
You will love this set!
''STUBBY'' (XZN) TRIPLE SQUARE8 PIECE SOCKET SET
Socket Set 3/8 DriveSizes included:
4mm, 5, 6, 8, 10, 12, 14 and 16mm
Comes with the plastic carrying case.
Sturdy compact One Piece design...SWEET.
Satin Chrome with black impact tips.
Super ''New'' S2 Alloy Steel. Fully Heat Treated
The large 16mm socket alone is hard to find for less than 12 dollars.

Tamperproof Set 14.99

Set Includes:
Mini Ratchet Bit Set.These are mainly Tamperproof bits in this set.THE SEVEN BITS ON THE LEFT SIDE OF THE SET ARE ''TORX TAMPERPROOF)Plus this set has a number 1 and 2 Phillips bitsPlus a flat head bit.The Torx sizes are: T10, T15, T20, T25, T30, T40The Torx have a hole in the tip (tamperproof).

This Folding Set has Tamperproof Torx heads too. Very hard to find this item in a tamperprooof style. (Each torx blade has a hole in the tip picture does not show the tips sorry) The Torx sizes are: T9, T10, T15, T20, T25, T27, T30, T40.

Torx Tamperproof Set 14.99

Set Includes: Mini Ratchet Bit Set.These are mainly Tamperproof bits in this set.THE SEVEN BITS ON THE LEFT SIDE OF THE SET ARE ''TORX TAMPERPROOF)Plus this set has a number 1 and 2 Phillips bitsPlus a flat head bit.The Torx sizes are: T10, T15, T20, T25, T30, T40The Torx have a hole in the tip (tamperproof).

This Folding Set has Tamperproof Torx heads too. Very hard to find this item in a tamperprooof style. (Each torx blade has a hole in the tip picture does not show the tips sorry) The Torx sizes are: T9, T10, T15, T20, T25, T27, T30, T40.

Aluminum Lug Socket 17mm 29.99

Impact Soft Aluminum Lug Socket 17mm. This is the real deal...You wont find a stronger, more durable impact socket equipped with an Aluminum ''Soft'' insert designed as to not damage, scuff or mar expensive high polished steel or aluminum Lug Bolts which are generally found on Porsche, BMW, Mercedes etc...
Length is 3.25 inches allowing for easy access to bolts on extra wide rims.

Aluminum Lug Socket 19mm 29.99

Impact Soft Aluminum Lug Socket 19mm. This is the real deal...You wont find a stronger, more durable impact socket equipped with an Aluminum ''Soft'' insert designed as to not damage, scuff or mar expensive high polished steel or aluminum Lug Bolts which are generally found on Porsche, BMW, Mercedes etc...
Length is 3.25 inches allowing for easy access to bolts on extra wide rims.

Triple Square Set 29.50

Triple Square Set 8 Piece.
Here is a set you may nothave seen before,especially this quality and for this price!
STUBBY XZN TRIPLE SQUARE8 PIECE SOCKET SET
Socket Set 3/8 DriveSizes included:
4mm, 5, 6, 8, 10, 12, 14 and 16mm
Comes with the plastic carrying case.
Sturdy compact One Piece design...SWEET.
Satin Chrome with black impact tips.
Super ''New'' S2 Alloy Steel. Fully Heat Treated
The large 16mm socket alone is hard to find for less than 12 dollars.

Ratcheting Female Torx Set 49.50

Check out this Torx Set.
Female Torx Hard to find.
This set features a standard driver handle
and a ratcheting handle bonus!
Details: 7'' Long Blades 10 Pc includes: Inverted Torx nut drivers E4 thru E16, ratcheting ''T'' handle, and 2 way screwdriver handle. Packed in storage case
(picture is for reference the image shows the complete set above and it shows both the handles in action).
The torx sizes in this set are: E4, E6, E7, E8, E10,
E12, E14 and E16.

T5 Torx Precision Driver 5.60

TORX Precision Technicians ScrewdriverSize T5 Very hard to find in this size!Exact Fit Precision Machined TipHigh Performance CRM72 Tool Steel. Micron Vapor Hard Chrome Protected Blades & tips Tapered Ergonomic Handle . Easy Spin Control Cap Handles Proportioned to Blade Sizes. Super hardened for longest tool lifeGuaranteed Quality Made In Germany
Overall length is 4.7 inches.

V159 Pin Wrench 19.50
TDI 1.9 Pin Wrench.
This is the Best Quality V159 you will find anywhere. Pin Wrench for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
eg; Double Pin Wrench special steel, burnished,for idler pulley on toothed belt, distance of pins 18 mm,diameter of pins 2.9 mm for deep located idler pulley on toothed belt on1,6 l diesel engine VW van T3 (up to model 1991).
read more:

German Car Lovers Special 99.95

Six Piece Wrench Set.
This first set of 4 wrenches includes (1) one each of the following wrench sizes: 27mm, 30mm, 32mm and 36mm.This set is great for the European Automotive Technician.Very Handy Tools!

Plus you get the set of 2 Long Pattern Thin Wrenches.One of each size open end: 36mm and 32mm.
At 20 inches long these two thin wrenches are LONGER than most wrenches you will find on the market. (Thickness of each wrench is 8mm). The long thin wrenches will also come with a handle grip on each. Great for the serious mechanic.

German Car Lovers Special * 99.95

Basic CIS Fuel Injection Pressure Tester 149.25

Basic CIS Fuel Injection Pressure Tester For Bosch CIS systems only. With this in line tester the mechanic can find bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters. The dual scale 2 1/2'' (65mm) gauge with hook has a 100 psi, 7 bar. Gauge and hose can be hung up to free the technicians hands. Included are all needed metric adapters. Banjo bolt fittings and 16'' Ga. hose and quick disconnect CIS hose assembly for fast and accurate servicing.

Spark Plug Boot Tool 32.99
Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:

Thin Wrench Made in Germany 13.50

20 x 22mm Thin Metric Wrench Made in Germany
Double Open Ended Spanner Super High Quality Tool
DIN 3110, ISO 10102 (metric size), Chrome Alloy Steel, chrome plated.
Stahlwille has a very distinctive design for its wrenches called the ''I Beam'' profile, because the wrenches look somewhat like I Beams that are used for construction. This unique design is ergonomic because it reduces the weight of the wrench by about 30%, it provides a thumb guide and the wrench is thickest on the outside surface where torque is applied.
It is hard to find a more comfortable, lighter or stronger wrench.

Thin Wrench Made in Germany 20.95

25 x 28mm Thin Metric Wrench Made in Germany
Double Open Ended Spanner Super High Quality Tool
DIN 3110, ISO 10102 (metric size), Chrome Alloy Steel, chrome plated.
Stahlwille has a very distinctive design for its wrenches called the ''I Beam'' profile, because the wrenches look somewhat like I Beams that are used for construction. This unique design is ergonomic because it reduces the weight of the wrench by about 30%, it provides a thumb guide and the wrench is thickest on the outside surface where torque is applied.
It is hard to find a more comfortable, lighter or stronger wrench.

Thin Wrench Made in Germany 15.50

21 x 23mm Thin Metric Wrench Made in Germany
Double Open Ended Spanner Super High Quality Tool
DIN 3110, ISO 10102 (metric size), Chrome Alloy Steel, chrome plated.
Stahlwille has a very distinctive design for its wrenches called the ''I Beam'' profile, because the wrenches look somewhat like I Beams that are used for construction. This unique design is ergonomic because it reduces the weight of the wrench by about 30%, it provides a thumb guide and the wrench is thickest on the outside surface where torque is applied.
It is hard to find a more comfortable, lighter or stronger wrench.

Thin Wrench Made in Germany 8.50

10 x 11mm Thin Metric Wrench Made in Germany
Double Open Ended Spanner Super High Quality Tool
DIN 3110, ISO 10102 (metric size), Chrome Alloy Steel, chrome plated.
Stahlwille has a very distinctive design for its wrenches called the ''I Beam'' profile, because the wrenches look somewhat like I Beams that are used for construction. This unique design is ergonomic because it reduces the weight of the wrench by about 30%, it provides a thumb guide and the wrench is thickest on the outside surface where torque is applied.
It is hard to find a more comfortable, lighter or stronger wrench.

Thin Wrench Made in Germany 9.95

11 x 13mm Thin Metric Wrench Made in Germany
Double Open Ended Spanner Super High Quality Tool
DIN 3110, ISO 10102 (metric size), Chrome Alloy Steel, chrome plated.
Stahlwille has a very distinctive design for its wrenches called the ''I Beam'' profile, because the wrenches look somewhat like I Beams that are used for construction. This unique design is ergonomic because it reduces the weight of the wrench by about 30%, it provides a thumb guide and the wrench is thickest on the outside surface where torque is applied.
It is hard to find a more comfortable, lighter or stronger wrench.

Thin Wrench Made in Germany 24.50

30 x 32mm Thin Metric Wrench Made in Germany
Double Open Ended Spanner Super High Quality Tool
DIN 3110, ISO 10102 (metric size), Chrome Alloy Steel, chrome plated.
Stahlwille has a very distinctive design for its wrenches called the ''I Beam'' profile, because the wrenches look somewhat like I Beams that are used for construction. This unique design is ergonomic because it reduces the weight of the wrench by about 30%, it provides a thumb guide and the wrench is thickest on the outside surface where torque is applied.
It is hard to find a more comfortable, lighter or stronger wrench.

Thin Wrench Made in Germany 53.50

36 x 41mm Thin Metric Wrench Made in Germany
Double Open Ended Spanner Super High Quality Tool
DIN 3110, ISO 10102 (metric size), Chrome Alloy Steel, chrome plated.
Stahlwille has a very distinctive design for its wrenches called the ''I Beam'' profile, because the wrenches look somewhat like I Beams that are used for construction. This unique design is ergonomic because it reduces the weight of the wrench by about 30%, it provides a thumb guide and the wrench is thickest on the outside surface where torque is applied.
It is hard to find a more comfortable, lighter or stronger wrench.

Thin Wrench Made in Germany 10.75

16 x 17mm Thin Metric Wrench Made in Germany
Double Open Ended Spanner Super High Quality Tool
DIN 3110, ISO 10102 (metric size), Chrome Alloy Steel, chrome plated.
Stahlwille has a very distinctive design for its wrenches called the ''I Beam'' profile, because the wrenches look somewhat like I Beams that are used for construction. This unique design is ergonomic because it reduces the weight of the wrench by about 30%, it provides a thumb guide and the wrench is thickest on the outside surface where torque is applied.
It is hard to find a more comfortable, lighter or stronger wrench.

Thin Wrench Made in Germany 18.99

24 x 26mm Thin Metric Wrench Made in Germany
Double Open Ended Spanner Super High Quality Tool
DIN 3110, ISO 10102 (metric size), Chrome Alloy Steel, chrome plated.
Stahlwille has a very distinctive design for its wrenches called the ''I Beam'' profile, because the wrenches look somewhat like I Beams that are used for construction. This unique design is ergonomic because it reduces the weight of the wrench by about 30%, it provides a thumb guide and the wrench is thickest on the outside surface where torque is applied.
It is hard to find a more comfortable, lighter or stronger wrench.

Thin Wrench Made in Germany 11.75

18 x 19mm Thin Metric Wrench Made in Germany
Double Open Ended Spanner Super High Quality Tool
DIN 3110, ISO 10102 (metric size), Chrome Alloy Steel, chrome plated.
Stahlwille has a very distinctive design for its wrenches called the ''I Beam'' profile, because the wrenches look somewhat like I Beams that are used for construction. This unique design is ergonomic because it reduces the weight of the wrench by about 30%, it provides a thumb guide and the wrench is thickest on the outside surface where torque is applied.
It is hard to find a more comfortable, lighter or stronger wrench.

Thin Wrench Made in Germany 9.75

10 x 12mm Thin Metric Wrench Made in Germany
Double Open Ended Spanner Super High Quality Tool
DIN 3110, ISO 10102 (metric size), Chrome Alloy Steel, chrome plated.
Stahlwille has a very distinctive design for its wrenches called the ''I Beam'' profile, because the wrenches look somewhat like I Beams that are used for construction. This unique design is ergonomic because it reduces the weight of the wrench by about 30%, it provides a thumb guide and the wrench is thickest on the outside surface where torque is applied.
It is hard to find a more comfortable, lighter or stronger wrench.

Audi Info and Timing 0.00

There are three main Cam bars for timing.
3391, 3243 and T40005
(T40005 is for V 8)
Notice the tool number 3242 this is the T.D.C (TOP DEAD CENTER) Pin
This pin goes with 3391 or 3243.
Type your selection in the search or you can find the tools in this Audi section.
Feel free to call me or email. I will try to assist you.
Please note:
In order to make your selection you must determine if your vehicle is 2 valve per cylinder or 5 valve per cylinder or V8. Example = Notice tool number 3391 says it is for 5 valve. The 3243 is for 2 valve per cylinder.

M4 XZN Triple Square Stubby Male 6.00

Size M4 Triple Square Stubby 3/8 Drive. Rare and hard to find single short pattern 12 point socket.
XZN (Triple Square) Super Stubby Socket This tool is 1 1/2'' long.
Sturdy compact One Piece design. Satin Chrome with black impact tips.
S2 Alloy Steel. Fully Heat Treated. Picture is for reference only. Seeother sizes Click Here to go to the SOCKET section.

You Searched for

xzn bit

Trade Links With ZDMAK